Raymarine Raymarine Blanking Plug SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £21.17 inc VAT Add to basket
Railblaza Railblaza Dinghy Visibility Kit The Dinghy Visibilty Kit is the perfect companion for small, tiller steered power boats and inflatables under 7 meters that do not exceed 7 knots. £107.83 inc VAT View product
Oxford Sigma ROX 4.0 GPS Cycle Computer Sensor Set – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Bundle Contains: Bike computer, USB-C cable, Quick-start guide, R1 DUO Heatrate transmitter and chest strap, Overclamp Butler GPS Mount, DUO Magnetless Speed Sensor, DUO Magnetless Cadence Sensor. £232.99 inc VAT Add to basket
Railblaza Railblaza RibPort inc 3M VHB – Black Fit accessories like rod holders, bait boards, fish finders and more to RIB or Inflatable boats, SUPs and kayaks without hassle or messy glues. The new 3M VHB pad allows you to peel and stick the RIBPort mount, then fit any of your favorite RAILBLAZA accessories. The 3M VHB is now supplied with every RIBPort pack. £41.95 inc VAT View product
Oxford Sigma ROX 4.0 GPS Cycle Computer – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Contains: Bike computer, GPS mount, Attachment material, USB-C cable, Quick-start instructions. £119.80 inc VAT Add to basket
Railblaza Railblaza Rod Holder R The Rod Holder R is a light duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for baitcaster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe. £35.89 inc VAT Add to basket
Railblaza Railblaza E Series USB Starport The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer. £45.43 inc VAT Add to basket
Railblaza Railblaza Kayak and Canoe Sounder and Transducer Mount The Sounder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or sounders. With this kit you can install and uninstall your fishfinder or sounder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe. £71.42 inc VAT View product
Railblaza Railblaza CleatPort RIBMount – Black The CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. £45.43 inc VAT View product
Raymarine Raymarine Extender SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £36.67 inc VAT Add to basket
Railblaza Railblaza E Series Cable Entry Port The E Series Cable Entry Port allows easy access for cables through the deck for tidy electronic mounting solutions. Wiring fishfinders, lighting, cameras and other electronics to your boat can be difficult and often leaves untidy cables in the way. £33.30 inc VAT Add to basket
