Actisense Actisense A2K-FFC-RF NMEA 2000 Field Fit Connector – Right Angle Female Field fit connectors allow full customisation of your NMEA 2000 network cabling. Right Angled Female Version £44.69 inc VAT Add to basket
Garmin Garmin GA 25MCX Low Profile Remote GPS Antenna For better reception in vessel interiors, this remote antenna is the answer. It has a built-in, magnetic mount, and comes with more than 9 feet (3 meters) of cable and MCX connector. £38.39 inc VAT View product
Raymarine Raymarine P79 Adjustable In-Hull Angle Compatible hull material: fiberglass. Max Power: 500W RMS (depending on connected SONAR). Frequency: 200/50 KHZ . Depth only. . Easily adjusts to any deadrise angle up to 22° . Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer . Can be removed in seconds for servicing or storage . Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy . Simplifies in-hull installation . £230.66 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable bare v2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs. £51.77 inc VAT View product
Garmin Garmin 6 Pin Transducer to 4 Pin Sounder Cable This transducer adapter allows you to use your existing 6-pin dual-beam transducer with your 4-pin echo™ series fishfinder. . £38.00 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Grey The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Oxford Oxford Beast Chain – 22mm x 2m The Beast chain would not look out of place attached to a ships anchor. It is our largest and strongest chain, ever. The 22mm hardened steel chain links each weigh the same as a bag of sugar. The links are covered with a protective and reflective material sleeve. £268.99 inc VAT Add to basket
Oxford Oxford Bottle Stash Adjustable drinks and fuel bottle carrier designed to fit Oxford Fuel flask 1.5L & 1.0L and the Oxford Insulated Drinks Bottle 1.0L. £39.34 inc VAT Add to basket
Garmin Garmin GNX Wireless Sail Pack 43 Update your sailing boat's electronics with the GNX Wireless Sail Pack 43 that includes everything you need with 43 mm transducer fittings for depth, temperature and water speed. GNX Wind Instrument - GNX Wind gives you the wind data necessary to make confident decisions. Featuring high-visibility, glass-bonded backlit monochrome LCD display with customisable backlight colours, GNX Wind interfaces through the NMEA 2000 network to show 2 data fields and a digital wind rose simultaneously to display true and apparent wind data, steering guidance, boat speed and more. Low power consumption of 350 mW daylight (no backlight) and 400 mW night-time (mid-level backlight) is perfect for sailing boats. Customisable user settings allow you to configure the screen layout to your preferred setting. Display configurations include more than 15 important marine parameters for wind, speed and navigation. The GNX Wind connects wirelessly with the gWind Wireless 2 and also to a quatix® 3 GPS marine smartwatch via ANT® technology to stream wind data directly to your wrist. gWind Wireless 2 Transducer - gWind Wireless 2 offers an easy-to-install solution that eliminates running wires through masts up to 15 meters. Accurate wind signals are sent wirelessly via an ANT connection directly to a GNX Wind instrument or to a compatible Garmin GPSMAP® chartplotter. The transducer features renowned Nexus twin-fin technology with a 3-bladed propeller, providing accurate wind speed and stable wind angle in lighter wind conditions. GNX 20 Marine Instrument - The easy-to-read GNX 20 display with black digits on a white or colour background clearly shows water depth, boat speed through the water, water temperature and 50-plus marine and boat parameters through the NMEA 2000 network. Customisable user settings allow you to choose from 5 available display configurations for sailing boat or powerboat user profiles: single, dual and triple function plus gauge and graph mode to display wind, depth and speed data, or customise the pages to display the marine and boat data most important to you. Its glass-bonded display with anti-glare lens coating provides excellent daytime and night-time readability with high-contrast digits scalable up to 36 mm. Uses only 25 mA with 350 mW daytime usage requiring no backlight and just 400 mW with a mid-level backlight setting at night. GDT 43 and GST 43 Transducers with 43 mm Fittings - If you already have 43 mm fittings for your thru-hull transducers, there’s no need to drill new holes. The bundle includes 43 mm thru-hull transducers, which can retrofit boats with existing Nexus TH43 transducers. The GST 43 is a speed and temperature transducer and the GDT 43 is a depth transducer. Each transducer comes with an adapter that allows data to be shared over the NMEA 2000 network to a compatible Garmin chartplotter or instrument display. In The Box gWind Wireless 2 transducer, GNX Wind instrument, GNX 20 instrument, GND 10, GDT 43 with NMEA 2000 adapter, GST 43 with GST 10, NMEA 2000 T-connectors, terminators, power cable and drop cable (2 m) and documentation. £1,294.01 inc VAT View product
Maretron Maretron Micro Double-Ended Cordset Male to Female 1m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and they are waterproof for continued operation even while submerged in the bilge. £60.00 inc VAT Add to basket
Railblaza Railblaza E Series Cable Entry Port The E Series Cable Entry Port allows easy access for cables through the deck for tidy electronic mounting solutions. Wiring fishfinders, lighting, cameras and other electronics to your boat can be difficult and often leaves untidy cables in the way. £33.30 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 5m SeaTalk ng Backbone cable - 5 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £67.67 inc VAT Add to basket
Oxford Oxford Beast Chain – 22mm x 1.5m The Beast chain would not look out of place attached to a ships anchor. It is our largest and strongest chain, ever. The 22mm hardened steel chain links each weigh the same as a bag of sugar. The links are covered with a protective and reflective material sleeve. £194.00 inc VAT Add to basket
Railblaza Railblaza Swing Arm R-Lock The Swing Arm R-Lock is a great addition to your Railblaza Kit. Adding the swing Arm R-Lock lets you swing your device out of the way or adjust it to a better viewing angle. With R-Lock on the top, and a friction joint on the bottom, you can set your viewing angle and then just swing it out of the way. £36.76 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable plug v1 20 metre long extension cable for wind instruments. £51.77 inc VAT Add to basket
Garmin Garmin VHF 315i Marine Radio The 25-watt VHF 315i marine radio with Class D DSC is a modular communication solution. It provides the security of reliable communication on the water by meeting the latest industry standards. Pre-programmed with international marine channels, it’s easy to use and integrates seamlessly into the Garmin onboard system. £754.01 inc VAT Add to basket
Raymarine Raymarine Bronze B117 Low Profile Thru Hull transducer Compatible hull material: wood and fiberglass. Depth only. Max Power: 600 watts. Frequency: 200/50 KHZ . Cable: 9.1m/30ft. Hole diameter for installation: 2". £359.83 inc VAT View product
Railblaza Railblaza USB Cable set and converter Replacement USB Cable and 12VDC voltage converter for E Series USB StarPort. £29.83 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Contains: Bike computer, GPS mount, Attachment material, USB-C cable, Quick-start instructions. £119.80 inc VAT Add to basket
Oxford Oxford Beast Lock Some say that size doesn't matter. When it comes to locks, it matters! The Oxford BEAST is so big it comes with a health warning on the box: WARNING - HEAVY! The lock alone weighs 3.6KG £184.01 inc VAT Add to basket
Actisense Actisense A2K-FFC-SM NMEA 2000 Field Fit Connector – Straight Male Allows for secure, reliable connections in any NMEA 2000 installation using Micro cable. Provides full flexibility and easy to install . The perfect complement to the Actisense 100M Bulk Reel of cable. £43.97 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer Sensor Set – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Bundle Contains: Bike computer, USB-C cable, Quick-start guide, R1 DUO Heatrate transmitter and chest strap, Overclamp Butler GPS Mount, DUO Magnetless Speed Sensor, DUO Magnetless Cadence Sensor. £232.99 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 0.5m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and they are waterproof for continued operation even while submerged in the bilge. £54.52 inc VAT Add to basket
Garmin Garmin gWind Wireless 2 Transducer The gWind Wireless 2 transducer offers an easy-to-install solution that eliminates running wires through masts up to 15 m (50 ft.). Accurate wind signals are sent via an ANT connection directly to a GNX Wind instrument or compatible Garmin GPSMAP 8400 series or GPSMAP 7400 series chartplotters. £664.01 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 1m SeaTalk ng Backbone cable - 1 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £52.18 inc VAT Add to basket
Railblaza Railblaza Adjustable Extender R-Lock With two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, the Adjustable Extender R-Lock adds great versatility. When coupled with one of RAILBLAZA's large range of accessories, it helps keep hold of your Fillet Table, fish finder, or any number of useful items. £37.62 inc VAT Add to basket