Raymarine Raymarine Spur Cable 1m SeaTalk ng Spur cable - 1 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £57.34 inc VAT Add to basket
Airmar Airmar DST800 P17 200BA 10m Cable Airmar 35-002-3-41 DST800 P17 Transducer with 10M Bare ends Cable The DST800 is an analog transducer that offers depth, speed, and temperature functions in one compact thru-hull fitting. £372.00 inc VAT View product
Raymarine Raymarine Backbone Cable 20m SeaTalk ng Backbone cable - 20 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £93.50 inc VAT Add to basket
Airmar Airmar DT800 P17 Smart Sensor 235kHz NMEA 0183 Airmar 44-084-1-01 DT800 P17 NMEA 0183 Smart Sensor with bare ends cable The DT800 utilizes Airmar’s proven Tilted Element™ and broadband technologies in this thru-hull depth and temperature Smart™ Sensor. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 o display or network. Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display. £1,119.00 inc VAT Add to basket
