SeaTalk ng Spur cable - 0.4 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone.

£52.18 inc VAT

Add to basket

Garmin

Garmin GT8HW-IF 4 Pin Ice Fishing Transducer

The GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation.

£170.78 inc VAT

View product

Raymarine

Raymarine Spur Cable 3m

SeaTalk ng Spur cable - 3 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.

£62.50 inc VAT

Add to basket

Garmin

Garmin GT8HW-TM 8 Pin Trolling Motor or Transom Mount Transducer

GT8HW-TM transducer is perfect for shallow water fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation. The wider beam width — up to 24 degree beam angle — provides a larger coverage area in the water. The 8-pin transducer features high wide band CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be mounted on the transom or a trolling motor. Follow the included installation instructions carefully to avoid damaging your boat. .

£170.78 inc VAT

Add to basket

Garmin

Garmin 8 Pin Transducer to 4 Pin Sounder Adapter Cable

Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.

£38.00 inc VAT

Add to basket

Raymarine

Raymarine Cantilever Socket Assembly

The cantilever socket is used where it is necessary to attach the autopilot to a vertical surface such as the cockpit sidewall and to mount it horizontally. The cantilever rod has a length of L = 220 mm and may be shortened. When the autopilot is not in use, the cantilever may be unscrewed.

£134.47 inc VAT

Add to basket

Garmin

Garmin gWind Race Wired Wind Transducer

Designed for racing sailboats, the gWind Race features a 1 meter straight pole to raise the transducer above the mast to remove turbulence errors. Features twin-fin technology with 3-bladed propeller for more accurate TWS in lighter air while the twin-fin design gives a more stable TWA. The 3-bladed propeller, unlike a cups design, is always efficient.

£1,204.01 inc VAT

View product

Garmin

Garmin GT23M-TH 8 Pin Thru-Hull Transducer

Perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat.

£754.01 inc VAT

Add to basket

Garmin

Garmin GT15M-TH 8 Pin Bronze Thru-Hull Transducer

GT15M-TH transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1000 feet.

£383.99 inc VAT

View product

Garmin

Garmin GND 10 Black Box Nexus to NMEA 2000 Bridge

The GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus Network and NMEA 2000 to provide compatibility between Nexus and Garmin products, including gWind, gWind Wireless and gWind Race transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity, eliminates the need for user setup and system configuration. GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol. In The Box GND 10, USB Mini-B cable, NMEA 2000 drop cable (2 m), NMEA 2000 T-connector, Nexus network cable (5 m; straight connector), Mounting hardware, Documentation.

£184.01 inc VAT

View product

Garmin

Garmin GT52HW-TM 12 Pin Transom Mount Transducer

GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat. The 12-pin transducer features high wide band CHIRP traditional sonar and has a power rating of 250 W. The CHIRP ClearVü and CHIRP SideVü (455/800 kHz) elements have a power rating of 350 W each (1,050 W total). GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.

£344.00 inc VAT

Add to basket