Garmin Garmin MCX to BNC Adapter Cable Match up your MCX and BNC connectors on your navigational device and external antenna with this MCX to BNC adapter cable. £38.00 inc VAT View product
Maretron Maretron Fuel Flow Monitor FFM100 converts a variety of flow senders (e.g., fuel, water, etc.) to NMEA 2000® Network Data. All flow senders ordered separately depending on application (i.e., single fuel flow sender for gas engine, dual fuel flow senders for diesel engine, water flow sender for sea water, etc.). Fuel flow senders facilitates fuel consumption optimization for reduced fuel operating cost. Fuel flow senders use positive displacement metering technology for superior accuracy over other measurement technology such as turbine meters. Fuel flow senders do not require costly fuel conditioning components like flow straighteners and pulse dampers. Fuel flow senders implement true temperature compensation with precision built-in thermistors for increased accuracy. Fuel flow senders automatically detect reverse flow due to fluctuating pressure difference from injection pumps. Fuel flow senders pass particle sizes up to 70 micrometres (diesel fuel filters normally filter down to 2 micrometres to prevent clogging injectors). £491.51 inc VAT View product
Maretron Maretron Internet Protocol Gateway IPG100 (Internet Protocol Gateway) lets you connect Maretron black boxes (MBB100's), Maretron touch screens (DSM800's), PC's, Mac's, tablets, or smartphones to an NMEA 2000 network. The conventional way of viewing NMEA 2000 information is with a display on the vessel that is directly connected to an NMEA 2000 network, but with the IPG100, you are not limited to direct connected displays. With the IPG100, you can use any device running N2KViewr software to monitor and control your vessel from onboard or ashore. £788.50 inc VAT Add to basket
NASA NASA MeteoMan Barometer Atmospheric Pressure Range: 850 to 1100mb (user adjustment to compensate for altitude). Pressure Trend: Rate of change of pressure for previous 24 hours in millibars per hour. Pressure History: 950 to 1050mb or 980 to 1030mb with 0.5mb resolution. Wind speed (when fitted with NMEA wind sensor) and Wind speed history. Wind direction (when fitted with NMEA wind sensor) in analogue and digital format. Real time clock with Race countdown timer and Stop watch with split timing. Outside temperature (when fitted with NMEA wind sensor) and Cabin temperature. Supply voltage: 9.0 to 15.0 volts. Operating current: 100mA (when fitted with NMEA wind sensor) / 150mA (with backlight illuminated) / Standby current - less than 10mA. Dimensions (WxHxD): 15.0 x 11.2 x 4.2 cm. £193.13 inc VAT Add to basket
NASA NASA 75cm MK1 (5 Wire) Wind masthead Unit Cable Replacement original equipment cable for the MK1 5 wire wind masthead unit. This is hard wired into the mast unit. Fitted with 5 pin DIN socket to attach to the 5 wire 20 metre mast cable connector. £30.80 inc VAT Add to basket
NASA NASA Marine Gas Detector comes with Gas sensor 850 to 1100mb (user adjustment to compensate for altitude). 0 to 360 degrees (in relative mode). Fail safe system warns user of system faults. Continuous performance monitor. Spare low cost plug in catalytic sensor - available. External output to drive ancillary equipment. 12 or 24 hour format. LEDs show system status continuously. Two tone alarm activates when gas level reaches 10% of lower explosive limit. £108.13 inc VAT Add to basket
NASA NASA Clipper Depth Sounder Best selling Depth sounder with giant 40mm high digits for easy viewing. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. In The Box Display Unit, In hull depth transducer with cable, Weather Cover. £213.83 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RJ45 (M) cable – 10m 10m RayNet to RJ45 male cable. £139.63 inc VAT Add to basket
NASA NASA BT3 Bluetooth Navtex comes with H Vector Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to H Vector or standard Series 2 antenna. Supply voltage 10 to 16 volts DC. Dimensions 135 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with active antenna, fused power cable and downloadable android app. Compatible with Android phones and tablets. £210.62 inc VAT Add to basket
