NASA NASA Cradle Mount Bracket for Clipper AIS Radar or Navtex Weatherman Optional cradle mount bracket for Clipper Navtex, Weatherman, AIS radar or Meteoman display units. £40.08 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 2m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. £65.51 inc VAT Add to basket
NASA NASA Navtex Pro Engine with Series 2 Antenna Raymarine C & E Series Navtex Pro receiver with dual frequenct Navtex antenna for connection to PC or white version available to connect to Raymarine C & E Series Classic Plotters. £178.27 inc VAT View product
Raymarine Raymarine SeaTalk NG (STNG) to Devicenet (Male) adaptor Cable (1m) STNG to Devicenet (Male) Adaptor Cable 1 meter. £67.67 inc VAT Add to basket
NASA NASA Target Navtex Pro V2 with Series 2 Antenna The Target Navtex Pro is packed with features yet is still remarkably easy to install and use. Great care has been taken to make this unit very simple to operate, in fact should one lose the comprehensive instruction book supplied with it, it is possible to program the unit via the on-screen menus - it really is that simple. £312.10 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable plug v1 20 metre long extension cable for wind instruments. £51.77 inc VAT Add to basket
NASA NASA Alarm Buzzer Unit Alarm buzzer for the Clipper, Target or Cruiser Depth sounders. £22.88 inc VAT Add to basket
NASA NASA Navtex PC Pro Engine-USB comes with H Vector Antenna The PC Navtex USB is a two channel navtex receiver designed to operate on a personal computer. It will receive navtex messages even without the PC connected. Navtex messages are stored in a vast internal memory and available to download when the system is booted up. £202.46 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 0.5m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and they are waterproof for continued operation even while submerged in the bilge. £54.52 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Power Cable SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £41.83 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Backbone Terminator SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £31.51 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Backbone Cable 9m SeaTalk ng Backbone cable - 9 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £78.00 inc VAT Add to basket
NASA NASA Weather covers for Clipper instruments Spare weather cover for Clipper Instruments (please indicate model with order). £21.43 inc VAT Add to basket
Actisense Actisense A2K-FFC-RF NMEA 2000 Field Fit Connector – Right Angle Female Field fit connectors allow full customisation of your NMEA 2000 network cabling. Right Angled Female Version £44.69 inc VAT Add to basket
Raymarine Raymarine In-Line SeaTalk NG (STNG) Terminator Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system. £36.67 inc VAT Add to basket
Actisense Actisense A2K-FFC-SF NMEA 2000 Field Fit Connector – Straight Female Field fit connectors allow full customisation of your NMEA 2000 network cabling. Straight Female Version £43.43 inc VAT Add to basket
Actisense Actisense NMEA 2000 T Piece The quality engineered connectors are shaped to allow easy and secure connections, even when field fit connectors are used, making it a totally unique T piece. With two female and one male connector, the A2K-T-MFF can be easily connected to Actisense NMEA 2000 micro cable assemblies, available in various lengths with UL certified cable for unbeatable quality. £45.97 inc VAT Add to basket
Actisense Actisense A2K-FFC-RM NMEA 2000 Field Fit Connector – Right Angle Male Field fit connectors allow full customisation of your NMEA 2000 network cabling. Right Angled Male Version £44.81 inc VAT Add to basket
NASA NASA BT3 Bluetooth Navtex S2 Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to H Vector or standard Series 2 antenna. Supply voltage 10 to 16 volts DC. Dimensions 135 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with active antenna, fused power cable and downloadable android app. Compatible with Android phones and tablets. £190.63 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable bare v2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs. £51.77 inc VAT View product
Actisense Actisense DIN Rail Mounting Kit For use with the EMU-1, NDC-5 & NBF-3. Suitable for use with a top hat rail, type EN50 022 or a G section rail, type EN 50 035. The EMU-1 can be mounted horizontally (recommended) or vertically. £31.67 inc VAT Add to basket
