Digital Yacht Digital Yacht Cabling Starter Kit NMEA 2000 A simple and low-cost NMEA 2000 starter kit which allows for up to 3 devices to interconnect. £132.41 inc VAT Add to basket
Garmin Garmin GT8HW-IF 4 Pin Ice Fishing Transducer The GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation. £170.78 inc VAT View product
NASA NASA Battery Monitor Compact Grey 12VDC Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium.Caravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-1 Compact is supplied with a precision 100 Amp shunt and prefabricated cables to enable simple DIY installation. £123.11 inc VAT Add to basket
Garmin Garmin NMEA 2000 Starter Kit Garmin's starter kit has everything you need to build a basic NMEA 2000 network on your boat. The kit includes an NMEA 2000 drop cable (2 m), backbone cable (6 m), power cable (2 m), 2 T-connectors, and male and female terminator connectors. £110.00 inc VAT Add to basket
NASA NASA Easy Navtex with Series 2 Antenna Nasa Easy Navtex with series 2 antenna. With big, bold characters for easy viewing and intuitive message formatting, this Navtex unit is very simple & easy to use. £356.42 inc VAT Add to basket
Railblaza Railblaza E Series Cable Entry Port The E Series Cable Entry Port allows easy access for cables through the deck for tidy electronic mounting solutions. Wiring fishfinders, lighting, cameras and other electronics to your boat can be difficult and often leaves untidy cables in the way. £33.30 inc VAT Add to basket
Oxford Oxford E-Mirror – Right Designed to fit in-board of the e-bike controls and handlebar grip, the E-Mirror is out of the way when the need to lean a heavier e-bike against a wall arises. With aluminium bar clamps and a fully adjustable fit, this versatile mirror is equally at home on a conventional bike. £37.32 inc VAT Add to basket
Actisense Actisense NMEA 2000 Lite Gender Changer Cable – 0.25m Female to Female Use between two cable connectors of the same type and gender of connector on a NMEA 2000 backbone. £47.71 inc VAT Add to basket
NASA NASA Battery Monitor Compact White 12VDC The BM-1 compact is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the battery’s state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. In The Box BM-COMPACT; Precision 100 AMP shunt; Prefabricated cable assembly. £123.11 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Red The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Railblaza Railblaza StarPort HD The StarPort HD is designed to fit the same mount base pattern of Scotty, Ram, Cannon, and many other brands. £28.10 inc VAT Add to basket
Railblaza Railblaza SidePort – Black The RAILBLAZA StarPort is a unique and versatile multifunctional mount, if you need this versatility from a vertical surface, but require a horizontal socket, SidePort is the mount for you. £27.22 inc VAT Add to basket
Railblaza Railblaza 19-25mm Rail Mount StarPort Combo – Black The RAILBLAZA RailMount combo 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment. £38.50 inc VAT Add to basket
Garmin Garmin GT8HW-IH 8 Pin In Hull Transducer GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (<6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer features high-wide CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat. £170.78 inc VAT Add to basket
Raymarine Raymarine Spur Cable 5m SeaTalk ng Spur cable - 5 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £72.84 inc VAT View product
Raymarine Raymarine Spur Cable 400mm SeaTalk ng Spur cable - 0.4 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £52.18 inc VAT Add to basket
Garmin Garmin Active Speaker for VHF 210i/215i/315i Connect your compatible VHF radio to a handset for onboard communication. The active speaker requires the GHS™ 11 wired VHF handset to adjust volume up or down as needed. £158.78 inc VAT Add to basket
Raymarine Raymarine CPT-S Plastic CHIRP Thru Hull Transducer – 20° Element Plastic Thru-Hull 20° Angled Element CHIRP Sonar Transducer. 20° Element for 15-25° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models). £297.83 inc VAT Add to basket
NASA NASA Clipper Wireless Wind with MHU and Data Box The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Wind display or any other compatible NMEA display unit. The Clipper Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication. £436.70 inc VAT Add to basket
Railblaza Railblaza StarPort – Black The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Actisense Actisense NMEA 2000 T Piece The quality engineered connectors are shaped to allow easy and secure connections, even when field fit connectors are used, making it a totally unique T piece. With two female and one male connector, the A2K-T-MFF can be easily connected to Actisense NMEA 2000 micro cable assemblies, available in various lengths with UL certified cable for unbeatable quality. £45.97 inc VAT Add to basket
Raymarine Raymarine Fistmic Adaptor Cable (12 pin to 8 pin) 400mm Adaptor Cable - Fistmic (12 pin to 10 pin) 400mm. £98.66 inc VAT View product
Garmin Garmin GT23M-TM 8 Pin Transom Mount Transducer GT23M-TM transducer is perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £344.00 inc VAT Add to basket
Garmin Garmin GT15M-TH 8 Pin Bronze Thru-Hull Transducer GT15M-TH transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1000 feet. £383.99 inc VAT View product
Raymarine Raymarine CPT-S Plastic CHIRP Thru Hull Transducer – 12° Element Plastic Thru-Hull 12° Angled Element CHIRP Sonar Transducer. 12° Element for 7-17° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models). £297.83 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Railblaza Railblaza E Series USB Starport The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer. £45.43 inc VAT Add to basket
