Maretron Maretron Micro Double-Ended Cordset Male to Female 1m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and they are waterproof for continued operation even while submerged in the bilge. £60.00 inc VAT Add to basket
Raymarine Raymarine Seatalk NG (STNG) 5 Way Connector The SeaTalk NG 5-Way connector creates up to 3 white spur connections in 1 location for connecting SeaTalk NG devices to the backbone. Dual blue ports connect to backbone cables allowing the network to pass-through to other locations on the boat, or accept network terminators to complete the circuit. £57.34 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RJ45 (M) cable – 10m 10m RayNet to RJ45 male cable. £139.63 inc VAT Add to basket
Garmin Garmin GT8HW-IF 4 Pin Ice Fishing Transducer The GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation. £170.78 inc VAT View product
Railblaza Railblaza 19-25mm Rail Mount StarPort Combo – White The RAILBLAZA RailMount combo 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment. £38.50 inc VAT View product
Oxford Oxford E-Mirror – Left Designed to fit in-board of the e-bike controls and handlebar grip, the E-Mirror is out of the way when the need to lean a heavier e-bike against a wall arises. With aluminium bar clamps and a fully adjustable fit, this versatile mirror is equally at home on a conventional bike. £37.32 inc VAT Add to basket
Maretron Maretron Fuel Flow Sensor 25 to 500 LPH 6.6 to 132GPH Fuel Flow Sensor for FFM100 fuel flow monitor Flow range : 6.6 to 132 GPH, 25 to 500 LPH. £766.50 inc VAT View product
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 8m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. £93.00 inc VAT Add to basket
Actisense Actisense NMEA 2000 Trunk / Drop Cable – 1m Available in various lengths, the cable assemblies can be used as either a drop cable from an NMEA 2000 backbone or to extend the length of the backbone trunk cable. 1m Cable £50.20 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 6m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. £87.50 inc VAT Add to basket
NASA NASA Clipper Tactical Wind System A high performance instrument system that shows almost instantaneous changes of wind speed and direction. In demanding conditions, where high performance is essential, the Clipper Tactical wind system is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The sensor is supplied complete with a mast mounting kit, 20 metres of light weight cable and all necessary electrical connectors to complete the installation. £348.74 inc VAT Add to basket
Actisense Actisense A2K-4WT NMEA 2000 4 Way Connector This 4 Way T-Piece from Actisense saves you time, space and money on your NMEA 2000 installation. £123.19 inc VAT Add to basket
Railblaza Railblaza QuikPort inc VHB – Black The RAILBLAZA QuikPort is a durable and weatherproof stick-on mount which will securely stick to your Stand Up Paddleboard (SUP), Inflatable Boat (RIB), kayak and many other vessels. The QuikPort is the perfect solution for holding your GoPro, action camera, navigation lights, phone, gas bottle or drink holder without the need to drill any holes. £32.42 inc VAT Add to basket
Railblaza Railblaza StarPort HD TracMount Kit Want a tool-free and centrally mounted lockable mount on your kayak track? StarPort HD can achieve this with the addition of the StarPort HD TracMount Kit. £24.62 inc VAT View product
Raymarine Raymarine Raymic Extension Cable – 10M 10 meter Raymic extension cable for Ray 60/63/70/73/90/91 £134.47 inc VAT Add to basket
Maretron Maretron Micro/Mid Field Attachable Connector Straight Female Maretron Micro/Mid Field Attachable Connector (Straight Female) FA-CM-ST. Field-attachable connectors allow you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cables. £49.01 inc VAT Add to basket
NASA NASA Alarm Buzzer Unit Alarm buzzer for the Clipper, Target or Cruiser Depth sounders. £22.88 inc VAT Add to basket
Railblaza Railblaza Rod Holder Extender The addition of a Rod Holder Extender to your rod holder will let you offset your rod holder too, adding another level of versatility to any RAILBLAZA rod holder. You can make your setup ergonomically better, get easier access to your rod holder. More importantly, you’ll have the rod in your hand faster when you get a strike. Rod Holder & StarPort not included £28.10 inc VAT Add to basket
NASA NASA Wind Vane Kit White Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units. £34.30 inc VAT Add to basket
NASA NASA BT3 Bluetooth Navtex comes with H Vector Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to H Vector or standard Series 2 antenna. Supply voltage 10 to 16 volts DC. Dimensions 135 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with active antenna, fused power cable and downloadable android app. Compatible with Android phones and tablets. £210.62 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RayNet (F) cable – 400mm 400mm Raynet to Raynet cable. £83.17 inc VAT View product
Raymarine Raymarine ST2 Adaptor Cable (5 Pin) ST2 Adaptor Cable (5 Pin) - 15.7in (0.4m). £36.67 inc VAT View product
Maretron Maretron Fuel Flow Sensor 2 to 100 LPH 0.53 to 26.4GPH Fuel Flow Sensor for FFM100 fuel flow monitor Flow range : 0.53 to 26.4 GPH, 2 to 100 LPH. £766.50 inc VAT Add to basket
Scanstrut Scanstrut DS-H10 Grey Plastic Horizontal Cable Seal 6-10mm Our most popular horizontal entry cable seal For cables from 6-10mm (0.24”-0.39”) - Perfect for solar panels, light bars, lights and other rooftop electronics. £39.20 inc VAT Add to basket
Garmin Garmin GT52HW-TM 12 Pin Transom Mount Transducer GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat. The 12-pin transducer features high wide band CHIRP traditional sonar and has a power rating of 250 W. The CHIRP ClearVü and CHIRP SideVü (455/800 kHz) elements have a power rating of 350 W each (1,050 W total). GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat. £344.00 inc VAT Add to basket
Raymarine Raymarine Type 1/12v Rotary Drive Maximum boat displacement: 11,000 kg. Peak output torque: 20 nm. Maximum shaft speed: 33 rpm. Recommended hard-over times (no load): 10 seconds. Power consumption: 24-48 W. Corepack used: SPX-10. £2,168.18 inc VAT View product
Actisense Actisense NMEA 2000 Protective Screw Cover – Female 10 Pack Protective screw on cover for NMEA 2000 Female end connectors. Pack of 10 £33.77 inc VAT Add to basket
Raymarine Raymarine Raymic Extension Cable – 5M 5 meter Raymic extension cable for Ray 60/63/70/73/90/91 £109.00 inc VAT Add to basket
NASA NASA Target Wind NMEA Repeater Target NMEA Wind Repeater with cable to attach to the Main V2 wind System screen. £109.09 inc VAT View product
Scanstrut Scanstrut Dual PowerTower Mount (Open Array) Mount multiple electronics together on one space saving mount and remove the need for an additional dummy satcom dome to balance the look of your install. £972.00 inc VAT View product
Raymarine Raymarine Type 2/12v Hydraulic Linear Drive Raymarine Hydraulic Linear Drives. Designed for larger mechanically steered vessels over 20,000kg, our hydraulic linear drives are self-contained hydraulic steering systems consisting of a reversing pump, reservoir and hydraulic ram. A hydraulic linear drive unit connects to the rudder stock via an independent tiller arm. Accessory fittings from your steering system manufacturer may be required. Must be able to back drive steering system for the rudder. £3,924.84 inc VAT View product
Scanstrut ROKK Mini Surface Mount Wherever and however you want to mount your electronics, there’s an option for you. Rokk mini surface mount screw down base mount fits any flat surface. £29.60 inc VAT Add to basket
Railblaza Railblaza StarPort – Black The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Railblaza Railblaza StarPort – White The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Garmin Garmin GT22HW-TM 8 Pin Transom Mount Transducer GT22HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom or trolling motor mounted transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP ClearVü (455/800 kHz) element has a power rating of 350 W. GT22HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat. £203.99 inc VAT Add to basket
Railblaza Railblaza 32-41mm Rail Mount StarPort Combo – Black The RAILBLAZA RailMount 32-41 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to both round and square boat rails, with the 32-41 being specifically designed to fit the Aka rails and H-Rails on Hobie kayaks. £40.22 inc VAT View product
Maretron Maretron Micro Double-Ended Cordset Male to Female 0.5m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and they are waterproof for continued operation even while submerged in the bilge. £54.52 inc VAT Add to basket
Raymarine Raymarine Spur Cable 5m SeaTalk ng Spur cable - 5 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £72.84 inc VAT View product
Actisense Actisense NMEA 2000 T Piece The quality engineered connectors are shaped to allow easy and secure connections, even when field fit connectors are used, making it a totally unique T piece. With two female and one male connector, the A2K-T-MFF can be easily connected to Actisense NMEA 2000 micro cable assemblies, available in various lengths with UL certified cable for unbeatable quality. £45.97 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Red The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
NASA NASA Clipper Speed Log Repeater The Clipper Log Repeater repeats all data from the master unit. In The Box Display; 10 metre cable; 'O' ring; Weather cover . £111.65 inc VAT Add to basket
Raymarine Raymarine Pedestal Socket 64mm Tiller Autopilot Pedestal Assembly 64mm, 2.5 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive £124.13 inc VAT View product
NASA NASA 20 Metre Wind MHU Extension cable plug v1 20 metre long extension cable for wind instruments. £51.77 inc VAT Add to basket
Scanstrut Scanstrut TBH-10 Through Bulkhead Cable Seal 10 x 7mm The best through-bulkhead seal for multiple electrical cables. Provides IP67 waterproof cable routing and anchoring for up to for 10 x 7mm (0.39" x 0.27") cables and will fit to any bulkhead, from 10mm to 35mm (0.39" to 1.37") thickness. £55.85 inc VAT Add to basket
Raymarine Raymarine Spur Cable 1m SeaTalk ng Spur cable - 1 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £57.34 inc VAT Add to basket
Garmin Garmin GT30-TM 12 Pin Transom Mount Transducer Weight: 1.08 lbs. (0.50 kg). Cable length: 20’. Number of pins on connector: 12. Dimensions: Transducer: 7.8 x 1.5 x 0.9 in (198 x 38 x 22 mm). Frequency: DownVü: CHIRP 425-485 kHz and CHIRP 790-850 kHz, SideVü: CHIRP 425-485 kHz and CHIRP 790-850 kHz. Max Depth: DownVü: 750 ft, SideVü: 500 ft. Transmit power: DownVü: 500 W, SideVü: 500 W. £203.99 inc VAT Add to basket
NASA NASA Target Wireless Wind System Full 360 degree display of apparent wind. No dead quadrant. Digital wind speed in knots. keypad adjustment of mast-head alignment. Supply voltage nominal 12v DC. Compact cockpit display unit 132 x 98 x 30mm. Sleep time > 15,000 Hours. Operating time > 2,000 Hours. Charging time < 150 Hours of bright daylight. Fully charged with no further daylight. £395.38 inc VAT Add to basket
Scanstrut ROKK Mini Rail Mount ROKK MINI RAIL MOUNT - Fits wide range of rails from 19mm – 34mm (¾ - 1¼”) Includes 3 x soft rail grip pad inserts for the perfect fit. £39.20 inc VAT Add to basket
Icom ICOM F51V F61V M87 Lithium Ion Battery Pack 7.2V 1850mAh 7.2V 1700mAh Li-Ion Battery Pack (std) for IC-M87. £164.81 inc VAT Add to basket
Q-Link Q-Link SRT-3 Stainless Steel Pendant Q-Link’s bestselling Pendant and flagship product is stylish and offers exceptional value. Designed by renowned artist Neville Brody with clean lines and a slim profile - it's timeless, utilitarian and complements a wide range of lifestyles. Available in a varied selection of colours, lightweight, durable and waterproof. £196.80 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable bare v2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs. £51.77 inc VAT View product
Maretron Maretron Micro/Mid 90 Male to Female Connector NMEA 2000 Approved. Waterproof rated to IP67. £60.00 inc VAT Add to basket
Actisense Actisense DIN Rail Mounting Kit For use with the EMU-1, NDC-5 & NBF-3. Suitable for use with a top hat rail, type EN50 022 or a G section rail, type EN 50 035. The EMU-1 can be mounted horizontally (recommended) or vertically. £31.67 inc VAT Add to basket
Raymarine Raymarine Pedestal Socket 51mm Tiller Autopilot Pedestal Assembly 51mm, 2 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive £124.13 inc VAT View product
