Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Railblaza Railblaza Navipack Portable LED Navigation Light Kit The NaviPack Portable LED Navigation Light Kit is the perfect companion for small, tiller steered power boats, inflatables, or as an emergency nav light pack for larger vessels. In one convenient, value-for-money pack you get everything you need to comply with the legal requirements in almost every country and territory. £192.95 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Orange The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Raymarine Raymarine Pushrod Extension 153mm 6″ Tiller Autopilot Drive Pushrod Extension 153mm, 6 inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive. £67.67 inc VAT Add to basket
Railblaza Railblaza Rod Holder II – Black The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position. £41.09 inc VAT Add to basket
Veratron Veratron Top Mount Bracket for Go Sensor Optional extra surface mounting bracket for all GO series sensors. £28.80 inc VAT Add to basket
Raymarine Raymarine Short Arm Wind Vane Transducer The Short Arm Wind Vane is a wind transducer by Raymarine that is compatible with iTC-5, ST50, ST60 and i60 instruments. £452.83 inc VAT Add to basket
Railblaza Railblaza Kayak and Canoe Sounder and Transducer Mount The Sounder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or sounders. With this kit you can install and uninstall your fishfinder or sounder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe. £71.42 inc VAT View product
NASA NASA Clipper AIS Plotter/Radar The Automatic Identification System (AIS) is a shipboard broadcast VHF transponder system, sending data about the identity of a ship. Its name, MMSI number, its latitude, longitude, speed, course and heading. All vessels over 300 gross tonnage and all passenger vessels are obliged to carry an AIS transponder. This transponder assists in traffic monitoring, management and collision prevention. The data is sent continuously and is useful to yachtsmen, particularly in busy shipping areas. £322.82 inc VAT Add to basket
Raymarine Raymarine Pushrod Extension 76mm 3″ Tiller Autopilot Drive Pushrod Extension 76mm, 3 inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive. £62.50 inc VAT Add to basket
Railblaza Railblaza 19-25mm Rail Mount StarPort Combo – White The RAILBLAZA RailMount combo 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment. £38.50 inc VAT View product
Veratron Veratron Go Data – NMEA 2000 BLE Bluetooth Gateway Bluetooth Gateway for the Veratron Go GPS GNSS Receiver allowing the visualization of NMEA 2000 boat data on your portable devices, such as smartphone or tablet. £184.01 inc VAT Add to basket
NASA NASA Wind Cups White Spare wind anemometer cup kit. Spare anemometer cup assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units. £34.30 inc VAT Add to basket
Garmin Garmin 12 Pin Transducer Extension Cable – 30ft (9m) Garmin 30ft Xdcr Extension Cable 12 Pin With XID. £63.98 inc VAT Add to basket
NASA NASA Wind Vane Kit White Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units. £34.30 inc VAT Add to basket
Railblaza Railblaza Rod Holder R The Rod Holder R is a light duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for baitcaster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe. £35.89 inc VAT Add to basket
Oxford Oxford E-Mirror – Right Designed to fit in-board of the e-bike controls and handlebar grip, the E-Mirror is out of the way when the need to lean a heavier e-bike against a wall arises. With aluminium bar clamps and a fully adjustable fit, this versatile mirror is equally at home on a conventional bike. £37.32 inc VAT Add to basket
Railblaza Railblaza Rod Holder II – White The Rod Holder II is robust, versatile, and value for money, it will hold your rod, you choose which position. £41.09 inc VAT View product
NASA NASA 20 Metre Wind MHU Extension cable bare v2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs. £51.77 inc VAT View product
Railblaza Railblaza 32-41mm Rail Mount StarPort Combo – Black The RAILBLAZA RailMount 32-41 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to both round and square boat rails, with the 32-41 being specifically designed to fit the Aka rails and H-Rails on Hobie kayaks. £40.22 inc VAT View product
Railblaza Railblaza Rod Tube The Rod Tube from RAILBLAZA has been designed to answer a lot of requests from customers who were wanting a simple fishing rod holder for boats and kayaks, while keeping their reels elevated and clear of waves and splash. £39.36 inc VAT Add to basket
Raymarine Raymarine Pushrod Extension 25mm 1″ Tiller Autopilot Drive Pushrod Extension 25mm,1 inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive. £62.50 inc VAT Add to basket
Raymarine Raymarine Tiller Bracket 51mm 2″ This is a Autohelm Tiller Bracket 51mm (2") Offset Part number D010 Includes Short Threaded Tiller Pin. £88.34 inc VAT View product
Railblaza Railblaza Adjustable Platform RAILBLAZA Platforms will fit into any RAILBLAZA mount, or many sailboat winch handle receivers. Once you have finished using the platform it can be removed and the StarPort can be retasked for another application. £33.30 inc VAT View product
Railblaza Railblaza StarPort – White The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Railblaza Railblaza Dinghy Visibility Kit The Dinghy Visibilty Kit is the perfect companion for small, tiller steered power boats and inflatables under 7 meters that do not exceed 7 knots. £107.83 inc VAT View product
