Q-Link Q-Link Brand Faceted Chain Stainless 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Victron Victron VE.Direct to BMV60xS Cable 3m Used to connect the BMV-600 series Battery Monitors to VE.Direct Enabled controllers £44.00 inc VAT View product
Raymarine Raymarine Pushrod Extension 51mm 2″ Tiller Autopilot Drive Pushrod Extension 51mm, 2 inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive. £62.50 inc VAT Add to basket
NASA NASA Marine Gas Detector comes with Gas sensor 850 to 1100mb (user adjustment to compensate for altitude). 0 to 360 degrees (in relative mode). Fail safe system warns user of system faults. Continuous performance monitor. Spare low cost plug in catalytic sensor - available. External output to drive ancillary equipment. 12 or 24 hour format. LEDs show system status continuously. Two tone alarm activates when gas level reaches 10% of lower explosive limit. £108.13 inc VAT Add to basket
Solar Technology Solar Technology 20W Flexi Solar Panel Kit Bulk Pack (5 Panels) The 20w PV Logic flexi solar panel can deliver up to 130wh per day and as such a degree of self-sufficiency can be achieved where power demand is limited to lighting, mobile device charging, powering electric gates and other low energy consumption DC appliance power is needed. Benefitting from a two year product warranty, the panel is supplied with a 4m cable, terminals, fuse and detailed installation instructions. NOTE – A charge controller will be needed to protect a battery from reverse feed and overcharging. £450.00 inc VAT Add to basket
Solar Technology Solar Technology 20W Flexi Solar Panel Kit The 20w PV Logic flexi solar panel can deliver up to 130wh per day and as such a degree of self-sufficiency can be achieved where power demand is limited to lighting, mobile device charging, powering electric gates and other low energy consumption DC appliance power is needed. Benefitting from a two year product warranty, the panel is supplied with a 4m cable, terminals, fuse and detailed installation instructions. NOTE – A charge controller will be needed to protect a battery from reverse feed and overcharging. £102.66 inc VAT Add to basket
Raymarine Raymarine Mounting Socket 2 per Pack Raymarine Mounting Socket (2 per Pack). £62.50 inc VAT Add to basket
Victron Victron VE.Direct Cable 5m ASS030530250: Victron Ve Direct Cable 5M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control. £32.00 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Black 30” for Pendants Our Q-Link brand 30" color coded bead chains look especially great matched with Acrylic Pendants of the same color - and are an ideal, comfortable and practical alternative to the standard cord. Ultra-durable baked enamel coating is water-based, lead-free and non-toxic. £24.96 inc VAT Add to basket
Solar Technology Solar Technology 20W Rigid Solar Panel Kit The 20w PV Logic solar panel can deliver up to 130wh per day so that a degree of self-sufficiency can be achieved where power demand is limited to lighting, mobile device charging, and other low energy consumption DC appliances. £81.01 inc VAT Add to basket
Raymarine Raymarine Micro Fluxgate S/A Replacment M022 Fluxgate Compass for Raymarine and Autohelm £144.80 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 1m SeaTalk ng Backbone cable - 1 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £52.18 inc VAT Add to basket
NASA NASA MeteoMan Barometer Atmospheric Pressure Range: 850 to 1100mb (user adjustment to compensate for altitude). Pressure Trend: Rate of change of pressure for previous 24 hours in millibars per hour. Pressure History: 950 to 1050mb or 980 to 1030mb with 0.5mb resolution. Wind speed (when fitted with NMEA wind sensor) and Wind speed history. Wind direction (when fitted with NMEA wind sensor) in analogue and digital format. Real time clock with Race countdown timer and Stop watch with split timing. Outside temperature (when fitted with NMEA wind sensor) and Cabin temperature. Supply voltage: 9.0 to 15.0 volts. Operating current: 100mA (when fitted with NMEA wind sensor) / 150mA (with backlight illuminated) / Standby current - less than 10mA. Dimensions (WxHxD): 15.0 x 11.2 x 4.2 cm. £193.13 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 5m SeaTalk ng Backbone cable - 5 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £67.67 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Raymarine Raymarine ST4000+ Wheel Drive Clamp Kit Poke Clamp Kit for Autohelm 4000 Wheel Pilot or ST4000 Wheel Pilot. Wheel is black. Wheel is black £57.34 inc VAT Add to basket
Scanstrut Scanstrut SC45 Satcom Antenna Mount High Strength Product - Single piece composite GRP moulding for a high strength, corrosion free mounting . Neat Installation - Satcom mount fixings hidden internally. Easy to Install & Maintain - Antenna fixings external for ease of antenna installation and maintenance. Watertight Installation - Includes factory fitted watertight seal & gland systems. Mounting Plate diameter: 360mm / 14.2 inches. Base Footprint diameter: 200mm / 7.9 inches. £408.00 inc VAT Add to basket
Q-Link Q-Link Brand Waxed Cord Black Pack of 5 for Pendants Black waxed replacement cord for all Q-Link pendants. 5 per package. . £21.96 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain White 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
Raymarine Raymarine Autopilot Rudder Reference Ball Joint Kit Replacement Ball Joint Kit for threaded stud on a Rudder Reference Transducer. £34.61 inc VAT Add to basket
Q-Link Q-Link Brand Bead Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Scanstrut Scanstrut Satcom Antenna Mount High Strength Product - Single piece composite GRP moulding for a high strength, corrosion free mounting . Neat Installation - Satcom mount fixings hidden internally. Easy to Install & Maintain - Antenna fixings external for ease of antenna installation and maintenance. Watertight Installation - Includes factory fitted watertight seal & gland systems. Mounting Plate diameter: 465mm / 18.3 inches. Base Footprint diameter: 200mm / 7.9 inches. £450.00 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Dynamic Red 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
