Garmin Garmin GT23M-TM 8 Pin Transom Mount Transducer GT23M-TM transducer is perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £344.00 inc VAT Add to basket
Digital Yacht Digital Yacht iKonvert NMEA2000 to USB Converter One NMEA2000 Gateway/Converter for all your data needs £216.22 inc VAT View product
Oxford Oxford E-Mirror – Right Designed to fit in-board of the e-bike controls and handlebar grip, the E-Mirror is out of the way when the need to lean a heavier e-bike against a wall arises. With aluminium bar clamps and a fully adjustable fit, this versatile mirror is equally at home on a conventional bike. £37.32 inc VAT Add to basket
Q-Link Q-Link Brand Bead Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Actisense Actisense A2K-FFC-RM NMEA 2000 Field Fit Connector – Right Angle Male Field fit connectors allow full customisation of your NMEA 2000 network cabling. Right Angled Male Version £44.81 inc VAT Add to basket
NASA NASA Navtex Pro Engine with Series 2 Antenna Raymarine C & E Series Navtex Pro receiver with dual frequenct Navtex antenna for connection to PC or white version available to connect to Raymarine C & E Series Classic Plotters. £178.27 inc VAT View product
Raymarine Raymarine CPT-S Plastic CHIRP Thru Hull Transducer – 20° Element Plastic Thru-Hull 20° Angled Element CHIRP Sonar Transducer. 20° Element for 15-25° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models). £297.83 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Railblaza Railblaza 19-25mm Rail Mount StarPort Combo – Black The RAILBLAZA RailMount combo 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment. £38.50 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Stainless 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Red The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Railblaza Railblaza TracLoader StarPort This mounting base allows tool-free installation off accessories on the gunnel tracks of most aluminium fishing boats, including Crestliner Boats SureMount, Tracker VersaTrack, Lund Sport Trak, Lowe Boats and Princecraft PrinceTrak.With the mounting port to the side, this base is best for fitting drink holders, storage caddys, phone holders and fishfinders. £35.89 inc VAT Add to basket
Airmar Airmar DST800 P17 200BA 10m Cable Airmar 35-002-3-41 DST800 P17 Transducer with 10M Bare ends Cable The DST800 is an analog transducer that offers depth, speed, and temperature functions in one compact thru-hull fitting. £372.00 inc VAT View product
Railblaza Railblaza SidePort – Black The RAILBLAZA StarPort is a unique and versatile multifunctional mount, if you need this versatility from a vertical surface, but require a horizontal socket, SidePort is the mount for you. £27.22 inc VAT Add to basket
Maretron Maretron Micro/Mid Field Attachable Connector Straight Male Maretron Micro/Mid Field Attachable Connector (Straight Male) FA-CM-ST. Field-attachable connectors allow you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cables. £49.01 inc VAT Add to basket
Maretron Maretron MPower VMM to NMEA 2000 Cable – 0.2m This cable is used to connect Maretron MPower VMM Switch Modules to the NMEA 2000 network. £87.50 inc VAT Add to basket
Garmin Garmin GT20-TM 8 Pin Transom Mount Transducer An all in one dual function (HD-ID traditional and DownVu) transducer. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. £160.80 inc VAT Add to basket
Actisense Actisense A2K-FFC-SF NMEA 2000 Field Fit Connector – Straight Female Field fit connectors allow full customisation of your NMEA 2000 network cabling. Straight Female Version £43.43 inc VAT Add to basket
Railblaza Railblaza Navipack Portable LED Navigation Light Kit The NaviPack Portable LED Navigation Light Kit is the perfect companion for small, tiller steered power boats, inflatables, or as an emergency nav light pack for larger vessels. In one convenient, value-for-money pack you get everything you need to comply with the legal requirements in almost every country and territory. £192.95 inc VAT Add to basket
Maretron Maretron Mini Field Attachable Connector Female Colour-coded screw terminators make for error-free field installation. Rugged housing material designed to withstand harsh marine environments . £65.51 inc VAT Add to basket
Garmin Garmin Marine Network Cable – 20ft (6.1m) This marine network cable is 20 ft. (6.1 m) but also available in lengths of 6 ft. (1.83 m), 40 ft. (12.19 m) or 500 ft. (152.4 m) of cable length. £51.00 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 400mm SeaTalk ng Backbone cable - 0.4 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £52.18 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Black 30” for Pendants Our Q-Link brand 30" color coded bead chains look especially great matched with Acrylic Pendants of the same color - and are an ideal, comfortable and practical alternative to the standard cord. Ultra-durable baked enamel coating is water-based, lead-free and non-toxic. £24.96 inc VAT Add to basket
Garmin Garmin Marine Network Cable Coupler Joins 2 marine network cables with a waterproof seal. £51.00 inc VAT Add to basket
Garmin Garmin VHF 315i Marine Radio The 25-watt VHF 315i marine radio with Class D DSC is a modular communication solution. It provides the security of reliable communication on the water by meeting the latest industry standards. Pre-programmed with international marine channels, it’s easy to use and integrates seamlessly into the Garmin onboard system. £754.01 inc VAT Add to basket
Garmin Garmin 12V Power Cable for Legacy GPS & GPSMAP Power up while you’re on the move. In-vehicle charging when you’re in between the trails. £39.46 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Dynamic Red 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
NASA NASA MeteoMan Barometer Atmospheric Pressure Range: 850 to 1100mb (user adjustment to compensate for altitude). Pressure Trend: Rate of change of pressure for previous 24 hours in millibars per hour. Pressure History: 950 to 1050mb or 980 to 1030mb with 0.5mb resolution. Wind speed (when fitted with NMEA wind sensor) and Wind speed history. Wind direction (when fitted with NMEA wind sensor) in analogue and digital format. Real time clock with Race countdown timer and Stop watch with split timing. Outside temperature (when fitted with NMEA wind sensor) and Cabin temperature. Supply voltage: 9.0 to 15.0 volts. Operating current: 100mA (when fitted with NMEA wind sensor) / 150mA (with backlight illuminated) / Standby current - less than 10mA. Dimensions (WxHxD): 15.0 x 11.2 x 4.2 cm. £193.13 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable bare v2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs. £51.77 inc VAT View product
NASA NASA Clipper Wireless Wind with MHU and Data Box The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Wind display or any other compatible NMEA display unit. The Clipper Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication. £436.70 inc VAT Add to basket
NASA NASA Clipper GPS Repeater The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boasts large clear digits and simple operation. Installation coundn’t be simpler with just a single wing nut to fasten the unit into the panel and two wires to connect to the GPS. £160.78 inc VAT Add to basket
Q-Link Q-Link SRT-3 Phosphorescent Pendant Q-Link’s bestselling Pendant and flagship product is stylish and offers exceptional value. Designed by renowned artist Neville Brody with clean lines and a slim profile - it's timeless, utilitarian and complements a wide range of lifestyles. Available in a varied selection of colours, lightweight, durable and waterproof. £96.96 inc VAT Add to basket
Garmin Garmin VHF 215i AIS Marine Radio This fixed-mount VHF 215i AIS radio displays AIS on the chartplotter to enhance communication, situational awareness and collision avoidance. £754.01 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 3m SeaTalk ng Backbone cable - 3 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £57.34 inc VAT Add to basket
Garmin Garmin GT30-TM 12 Pin Transom Mount Transducer Weight: 1.08 lbs. (0.50 kg). Cable length: 20’. Number of pins on connector: 12. Dimensions: Transducer: 7.8 x 1.5 x 0.9 in (198 x 38 x 22 mm). Frequency: DownVü: CHIRP 425-485 kHz and CHIRP 790-850 kHz, SideVü: CHIRP 425-485 kHz and CHIRP 790-850 kHz. Max Depth: DownVü: 750 ft, SideVü: 500 ft. Transmit power: DownVü: 500 W, SideVü: 500 W. £203.99 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable plug v1 20 metre long extension cable for wind instruments. £51.77 inc VAT Add to basket
Railblaza Railblaza Dinghy Visibility Kit The Dinghy Visibilty Kit is the perfect companion for small, tiller steered power boats and inflatables under 7 meters that do not exceed 7 knots. £107.83 inc VAT View product
Q-Link Q-Link Brand Waxed Cord Black Pack of 5 for Pendants Black waxed replacement cord for all Q-Link pendants. 5 per package. . £21.96 inc VAT Add to basket
Garmin Garmin GT15M-TH 8 Pin Bronze Thru-Hull Transducer GT15M-TH transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation to depth up to 1000 feet. £383.99 inc VAT View product
Railblaza Railblaza StarPort HD TracMount Kit Want a tool-free and centrally mounted lockable mount on your kayak track? StarPort HD can achieve this with the addition of the StarPort HD TracMount Kit. £24.62 inc VAT View product
Maretron Maretron Micro/Mid 90 Male to Female Connector NMEA 2000 Approved. Waterproof rated to IP67. £60.00 inc VAT Add to basket
Railblaza Railblaza Rod Holder R The Rod Holder R is a light duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for baitcaster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe. £35.89 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain White 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
NASA NASA Marine Gas Detector comes with Gas sensor 850 to 1100mb (user adjustment to compensate for altitude). 0 to 360 degrees (in relative mode). Fail safe system warns user of system faults. Continuous performance monitor. Spare low cost plug in catalytic sensor - available. External output to drive ancillary equipment. 12 or 24 hour format. LEDs show system status continuously. Two tone alarm activates when gas level reaches 10% of lower explosive limit. £108.13 inc VAT Add to basket
Railblaza Railblaza Kayak and Canoe Sounder and Transducer Mount The Sounder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or sounders. With this kit you can install and uninstall your fishfinder or sounder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe. £71.42 inc VAT View product
Railblaza Railblaza StarPort – Black The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Raymarine Raymarine CPT-S Plastic CHIRP Thru Hull Transducer – 12° Element Plastic Thru-Hull 12° Angled Element CHIRP Sonar Transducer. 12° Element for 7-17° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models). £297.83 inc VAT Add to basket
NASA NASA Clipper Depth Sounder Best selling Depth sounder with giant 40mm high digits for easy viewing. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. In The Box Display Unit, In hull depth transducer with cable, Weather Cover. £213.83 inc VAT Add to basket
Scanstrut ROKK Mini Rail Mount ROKK MINI RAIL MOUNT - Fits wide range of rails from 19mm – 34mm (¾ - 1¼”) Includes 3 x soft rail grip pad inserts for the perfect fit. £39.20 inc VAT Add to basket
Scanstrut ROKK Mini Cable Tie Rail Mount ROKK MINI CABLE TIE MOUNT - Over-size rail mount base which fits wide range of non-standard rail sizes Wherever and however you want to mount your electronics, there’s an option for you. £34.40 inc VAT Add to basket
Railblaza Railblaza StarPort HD The StarPort HD is designed to fit the same mount base pattern of Scotty, Ram, Cannon, and many other brands. £28.10 inc VAT Add to basket
Maretron Maretron Mpower VMM6 – 6 x Momentary On – No Rockers The new MPower Series by Maretron replaces standard mechanical circuit breakers and switches with state-of-the-art digital power distribution. Customers looking to achieve the power and convenience of advanced home automation for their boats will appreciate MPower’s seamless, reliable operation as well as and cost-effective installation. £104.00 inc VAT View product
Airmar Airmar DST800 P17 Smart Sensor 235kHZ NMEA 0183 Airmar 44-072-2-41 DST800 P17 Smart Sensor NMEA 0183 With Bare Cable Ends The DST800 is a Smart, TRIDUCER® Multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. The DST800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000® display or network. Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled. £1,017.00 inc VAT Add to basket
NASA NASA Cradle Mount Bracket for Clipper AIS Radar or Navtex Weatherman Optional cradle mount bracket for Clipper Navtex, Weatherman, AIS radar or Meteoman display units. £40.08 inc VAT Add to basket
NASA NASA Navtex PC Pro Engine USB with Series 2 Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to standard Nasa Navtex antenna supplied. Supply voltage 10 to 16 volts DC. Dimensions 115 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with PC CD software, USB connection lead, fused power cable and Series 2 active antenna. Compatible with Windows XP to 8. £178.27 inc VAT Add to basket
