Raymarine Raymarine SeaTalk NG (STNG) Backbone Kit SeaTalkNG is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. £318.50 inc VAT View product
Raymarine Raymarine CPT-S Plastic CHIRP Thru Hull Transducer – 20° Element Plastic Thru-Hull 20° Angled Element CHIRP Sonar Transducer. 20° Element for 15-25° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models). £297.83 inc VAT Add to basket
Maretron Maretron Fuel Flow Sensor 2 to 100 LPH 0.53 to 26.4GPH Fuel Flow Sensor for FFM100 fuel flow monitor Flow range : 0.53 to 26.4 GPH, 2 to 100 LPH. £766.50 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Red The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 20m SeaTalk ng Backbone cable - 20 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £93.50 inc VAT Add to basket
NASA NASA Target Wind NMEA Repeater Target NMEA Wind Repeater with cable to attach to the Main V2 wind System screen. £109.09 inc VAT View product
NASA NASA Clipper Wireless Wind with MHU and Data Box The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Wind display or any other compatible NMEA display unit. The Clipper Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication. £436.70 inc VAT Add to basket
Oxford Oxford E-Mirror – Left Designed to fit in-board of the e-bike controls and handlebar grip, the E-Mirror is out of the way when the need to lean a heavier e-bike against a wall arises. With aluminium bar clamps and a fully adjustable fit, this versatile mirror is equally at home on a conventional bike. £37.32 inc VAT Add to basket
NASA NASA Wind Vane Kit Wireless and Tactical White Wireless & Tactical Wind vane kit. £33.20 inc VAT Add to basket
Maretron Maretron Micro/Mid Field Attachable Connector Straight Female Maretron Micro/Mid Field Attachable Connector (Straight Female) FA-CM-ST. Field-attachable connectors allow you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cables. £49.01 inc VAT Add to basket
Garmin Garmin Marine Network Cable – 20ft (6.1m) This marine network cable is 20 ft. (6.1 m) but also available in lengths of 6 ft. (1.83 m), 40 ft. (12.19 m) or 500 ft. (152.4 m) of cable length. £51.00 inc VAT Add to basket
Railblaza Railblaza E Series USB Starport The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer. £45.43 inc VAT Add to basket
Raymarine Raymarine Pedestal Assembly 89mm 3.5″ Tiller Autopilot Pedestal Assembly 89mm, 3.5 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive. £124.13 inc VAT Add to basket
Scanstrut Scanstrut DS16-S Stainless Steel Vertical Cable Seal 2-8mm IP68 vertical entry cable seal For cables from 2-8mm (0.08"-0.35"), connectors up to Ø16mm (0.63") an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly. £53.60 inc VAT Add to basket
Garmin Garmin NMEA 2000 Field-installable Connector – Male Use the male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables. £45.98 inc VAT Add to basket
Garmin Garmin 4 Pin Dual Beam Transom Mount Transducer This dual beam transducer replaces the one included with your echo series fishfinder. A 500 W 4-pin transducer; an operating frequency of 77 to 200 kHz; a beamwidth of 45 to 15 degrees; and mounts on a 0 to 70 degree transom. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. £81.00 inc VAT Add to basket
NASA NASA Target Navtex Pro V2 comes with H Vector Antenna The Target Navtex Pro is packed with features yet is still remarkably easy to install and use. Great care has been taken to make this unit very simple to operate, in fact should one lose the comprehensive instruction book supplied with it, it is possible to program the unit via the on-screen menus - it really is that simple. The messages are displayed on a high contrast backlit liquid crystal display with a clear line space between messages to aid location - this is necessary as the unit has a very large memory. You can be sure you always have up to the minute data as the memory will overwrite the oldest messages if it becomes full. However you can at any time erase the data memory if you wish. It is like a continuous stream of paper - without the mess or expense! Navtex has come of age, a free worldwide information service in English. A Navtex receiver is fast becoming a most essential piece of equipment and the Target Navtex Pro is state of the art. This excellent piece of equipment comes complete with its own active aerial and is designed to be left on continuously - consuming a miserly 40mA. Can you afford to be without one? Technical Specifications 518 & 490 kHz operation 800 line memory with line space between messages and no words broken at line ends Automatic reset from power up Single and multiple line message scrolling Non volatile program and message memory Program status can be viewed and changed at any time Switchable Backlight with power save timer Easy to read text on high contrast backlit LCD AERIAL - H Vector Navtex Antenna Supply voltage 12-15v DC Current consumption 40mA + 200mA for switchable backlight Dimensions - Width 220mm, Height 98mm, Depth 48mm. £333.10 inc VAT Add to basket
NASA NASA Clipper Speed Log Repeater The Clipper Log Repeater repeats all data from the master unit. In The Box Display; 10 metre cable; 'O' ring; Weather cover . £111.65 inc VAT Add to basket
Airmar Airmar DST800 P17 200BA 10m Cable Airmar 35-002-3-41 DST800 P17 Transducer with 10M Bare ends Cable The DST800 is an analog transducer that offers depth, speed, and temperature functions in one compact thru-hull fitting. £372.00 inc VAT View product
Raymarine Raymarine SeaTalk NG (STNG) Power Cable SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £41.83 inc VAT Add to basket
Railblaza Railblaza StarPort – Black The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
NASA NASA Battery Monitor Clipper BM1 24 VDC The BM-1 is designed to monitor performance of 24 Volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. £123.62 inc VAT Add to basket
Actisense Actisense A2K-4WT NMEA 2000 4 Way Connector This 4 Way T-Piece from Actisense saves you time, space and money on your NMEA 2000 installation. £123.19 inc VAT Add to basket
Garmin Garmin GT20-TM 8 Pin Transom Mount Transducer An all in one dual function (HD-ID traditional and DownVu) transducer. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. £160.80 inc VAT Add to basket
Railblaza Railblaza Swing Arm R-Lock The Swing Arm R-Lock is a great addition to your Railblaza Kit. Adding the swing Arm R-Lock lets you swing your device out of the way or adjust it to a better viewing angle. With R-Lock on the top, and a friction joint on the bottom, you can set your viewing angle and then just swing it out of the way. £36.76 inc VAT Add to basket
Maretron Maretron Mini Bulk Cable Single piece grey 100 meter spool Meets and exceeds NMEA 2000® specifications for the highest reliability. Trunk or drop cable for use with Mini connectors. Used with field-attachable connectors to build exact length cables at the job site. £1,069.01 inc VAT View product
Garmin Garmin GT20-TM 4 Pin Transom Mount Transducer An all in one dual function (HD-ID traditional and DownVu) transducer. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat. £130.80 inc VAT Add to basket
NASA NASA Target 2 Depth Sounder The biggest selling marine instrument worldwide is still the depth sounder. In the Target sounder you will find all the necessary features of much higher priced units including keel offset, shallow and deep water alarms, and a depth range of 0.8 - 100 metres. £153.20 inc VAT Add to basket
Railblaza Railblaza CleatPort RIBMount – Black The CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. £45.43 inc VAT View product
NASA NASA Target Wireless Wind System Full 360 degree display of apparent wind. No dead quadrant. Digital wind speed in knots. keypad adjustment of mast-head alignment. Supply voltage nominal 12v DC. Compact cockpit display unit 132 x 98 x 30mm. Sleep time > 15,000 Hours. Operating time > 2,000 Hours. Charging time < 150 Hours of bright daylight. Fully charged with no further daylight. £395.38 inc VAT Add to basket
Maretron Maretron Fuel Flow Sensor 25 to 500 LPH 6.6 to 132GPH Fuel Flow Sensor for FFM100 fuel flow monitor Flow range : 6.6 to 132 GPH, 25 to 500 LPH. £766.50 inc VAT View product
Railblaza Railblaza Male and Female Cable set Replacement cable for E series StarPort. 2 core cable with waterproof connector suitable for devices up to 12VDC. £22.02 inc VAT Add to basket
Actisense Actisense NMEA 2000 T Piece The quality engineered connectors are shaped to allow easy and secure connections, even when field fit connectors are used, making it a totally unique T piece. With two female and one male connector, the A2K-T-MFF can be easily connected to Actisense NMEA 2000 micro cable assemblies, available in various lengths with UL certified cable for unbeatable quality. £45.97 inc VAT Add to basket
NASA NASA Clipper Close Haul Meter This connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sailing close to - or running with the wind. Complete with 5M cable. £111.65 inc VAT Add to basket
Scanstrut ROKK Mini Cable Tie Rail Mount ROKK MINI CABLE TIE MOUNT - Over-size rail mount base which fits wide range of non-standard rail sizes Wherever and however you want to mount your electronics, there’s an option for you. £34.40 inc VAT Add to basket
Maretron Maretron Micro/Mid 90 Male to Female Connector NMEA 2000 Approved. Waterproof rated to IP67. £60.00 inc VAT Add to basket
Garmin Garmin GT22HW-TM 8 Pin Transom Mount Transducer GT22HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom or trolling motor mounted transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP ClearVü (455/800 kHz) element has a power rating of 350 W. GT22HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat. £203.99 inc VAT Add to basket
Airmar Airmar DST800 P17 Smart Sensor 235kHZ NMEA 0183 Airmar 44-072-2-41 DST800 P17 Smart Sensor NMEA 0183 With Bare Cable Ends The DST800 is a Smart, TRIDUCER® Multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. The DST800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000® display or network. Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled. £1,017.00 inc VAT Add to basket
Railblaza Railblaza RibPort inc 3M VHB – Black Fit accessories like rod holders, bait boards, fish finders and more to RIB or Inflatable boats, SUPs and kayaks without hassle or messy glues. The new 3M VHB pad allows you to peel and stick the RIBPort mount, then fit any of your favorite RAILBLAZA accessories. The 3M VHB is now supplied with every RIBPort pack. £41.95 inc VAT View product
Scanstrut ROKK Mini Rail Mount ROKK MINI RAIL MOUNT - Fits wide range of rails from 19mm – 34mm (¾ - 1¼”) Includes 3 x soft rail grip pad inserts for the perfect fit. £39.20 inc VAT Add to basket
Raymarine Raymarine Raymic Extension Cable – 15m 15 meter Raymic extension cable for Ray 60/63/70/73/90/91 £184.16 inc VAT Add to basket
Garmin Garmin GT8HW-IF 4 Pin Ice Fishing Transducer The GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation. £170.78 inc VAT View product
Garmin Garmin Marine Network Cable – 6ft (1.83m) This marine network cable is 6 ft. (1.83 m) but also available in lengths of 20 ft. (6.1 m), 40 ft. (12.19 m) or 500 ft. (152.4 m) of cable length. £40.99 inc VAT Add to basket
Raymarine Raymarine Spur Cable 1m SeaTalk ng Spur cable - 1 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £57.34 inc VAT Add to basket
Garmin Garmin 12 Pin Transducer Extension Cable – 30ft (9m) Garmin 30ft Xdcr Extension Cable 12 Pin With XID. £63.98 inc VAT Add to basket
Garmin Garmin GT8HW-TM 8 Pin Trolling Motor or Transom Mount Transducer GT8HW-TM transducer is perfect for shallow water fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation. The wider beam width — up to 24 degree beam angle — provides a larger coverage area in the water. The 8-pin transducer features high wide band CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be mounted on the transom or a trolling motor. Follow the included installation instructions carefully to avoid damaging your boat. . £170.78 inc VAT Add to basket
Garmin Garmin GNX Wireless Wind Pack When you have a GNX Wind instrument combined with a gWind Wireless 2 transducer, you’ll know what’s going on with the wind. GNX Wind Instrument - GNX Wind gives you the wind data necessary to make confident decisions. Featuring a high-visibility, glass-bonded backlit monochrome LCD display with customisable backlight colours, GNX Wind interfaces through the NMEA 2000® network to show 2 data fields and a digital wind rose simultaneously to display true* and apparent wind data, steering guidance, boat speed and more. Low power consumption of 350 mW daylight (no backlight) and 400 mW night-time (mid-level backlight) is perfect for sailboats. Customisable user settings allow you to configure the screen layout to your preferred setting. Display configurations include more than 15 important marine parameters for wind, speed and navigation. It can even wirelessly connect to a quatix® 3 GPS marine smartwatch via ANT® technology to stream wind data directly to your wrist. gWind Wireless 2 Transducer - gWind Wireless 2 offers an easy-to-install solution that eliminates running wires through masts up to 15 m (50 ft.). Accurate wind signals are sent via an ANT connection directly to a GNX Wind instrument or to a compatible Garmin GPSMAP® chartplotter. The transducer features renowned Nexus® twin-fin technology with a 3-bladed propeller, providing accurate wind speed and stable wind angle in lighter wind conditions. Also available in a wide selection of Wind and Sail Packs (sold separately) that can be used as standalone wind systems or expanded to full network systems via NMEA 2000. * For true wind information, speed through the water and heading inputs are required. In The Box gWind™ Wireless 2 transducer, GNX™ Wind instrument and documentation. £844.01 inc VAT Add to basket
Raymarine Raymarine Raymic Extension Cable – 5M 5 meter Raymic extension cable for Ray 60/63/70/73/90/91 £109.00 inc VAT Add to basket
