Raymarine Raymarine AIS700 Class B AIS Transceiver with Antenna Splitter The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems. £1,195.00 inc VAT Add to basket
NASA NASA Target HF3/P The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to 'get on the air'. Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies. The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant 'correcting' with the tuning knob so often associated with SSB signals as the receiver is fully synthesised. TARGET HF3/P. The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic wire antenna, 12 volt power cable and instruction book. £274.49 inc VAT Add to basket
NASA NASA Yacht Repeater Display The NASA Marine Yacht Repeater displays essential navigation information from a range of NMEA-0183 enabled devices. The large LCD display is easy to read at a distance and over a wide viewing angle. For night viewing the characters glow red on a black background producing a very sharp image without compromising the crew's night vision. Selection of data and back-light intensity are performed using a waterproof wireless remote control unit. The weatherproof display is designed to mount on a mast or other structure on a vessel. £271.68 inc VAT View product
Raymarine Raymarine Mounting Socket 2 per Pack Raymarine Mounting Socket (2 per Pack). £62.50 inc VAT Add to basket
Q-Link Q-Link Brand Waxed Cord Black Pack of 5 for Pendants Black waxed replacement cord for all Q-Link pendants. 5 per package. . £21.96 inc VAT Add to basket
Q-Link Q-Link Brand Bead Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Raymarine Raymarine Micro Fluxgate S/A Replacment M022 Fluxgate Compass for Raymarine and Autohelm £144.80 inc VAT Add to basket
Raymarine Raymarine Pushrod Extension 102mm 4″ Raymarine Pushrod Extensions for ST1000 and ST2000 Tiller Pilots available in 6 sizes for 25-153mm. £67.67 inc VAT View product
Raymarine Raymarine Blanking Plug SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £21.17 inc VAT Add to basket
Raymarine Raymarine Wheeldrive Motor Assembly Raymarine Wheeldrive Motor for Autohelm 4000 WheelPilot or ST4000 WheelPilot. Suitable for MK1 (Black Drive). £78.00 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Black 30” for Pendants Our Q-Link brand 30" color coded bead chains look especially great matched with Acrylic Pendants of the same color - and are an ideal, comfortable and practical alternative to the standard cord. Ultra-durable baked enamel coating is water-based, lead-free and non-toxic. £24.96 inc VAT Add to basket
NASA NASA Clipper Close Haul Meter This connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sailing close to - or running with the wind. Complete with 5M cable. £111.65 inc VAT Add to basket
Raymarine Raymarine Pushrod Extension 127mm 5″ Raymarine pushrod extension that fits any Raymarine tiller pilot system. . £62.50 inc VAT View product
Raymarine Raymarine SeaTalk NG (STNG) Backbone Terminator SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £31.51 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 1m SeaTalk ng Backbone cable - 1 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £52.18 inc VAT Add to basket
Solar Technology Solar Technology 20W Flexi Solar Panel Kit The 20w PV Logic flexi solar panel can deliver up to 130wh per day and as such a degree of self-sufficiency can be achieved where power demand is limited to lighting, mobile device charging, powering electric gates and other low energy consumption DC appliance power is needed. Benefitting from a two year product warranty, the panel is supplied with a 4m cable, terminals, fuse and detailed installation instructions. NOTE – A charge controller will be needed to protect a battery from reverse feed and overcharging. £102.66 inc VAT Add to basket
NASA NASA Yacht Repeater Data Box The NASA Marine Yacht Repeater displays essential navigation information from a range of NMEA-0183 enabled devices. The weatherproof display connects, via a three way screened cable, to the data control box which is sited below deck. The data control box connects to the vessel's 12 volt supply and has inputs for up to six NMEA instruments. £165.29 inc VAT View product
Q-Link Q-Link Brand Ball Chain Dynamic Red 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Stainless 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Raymarine Raymarine Extender SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £36.67 inc VAT Add to basket
Raymarine Raymarine Tiller Bracket 25mm 1″ 1 Inch Tiller Bracket For All Raymarine Tiller Pilots. £88.34 inc VAT Add to basket
Solar Technology Solar Technology 20W Rigid Solar Panel Kit & 10Ah Charge Controller The 20w PV Logic solar panel can deliver up to 130wh per day so that a degree of self-sufficiency can be achieved where power demand is limited to lighting, mobile device charging, and other low energy consumption DC appliances. Includes 10A Dual Battery Charge Controller to protect battery from reverse feed and overcharging. £120.47 inc VAT View product
Q-Link Q-Link Brand Ball Chain White 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
NASA NASA Wind Vane Kit White Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units. £34.30 inc VAT Add to basket
