Scanstrut Scanstrut DS-H10 Grey Plastic Horizontal Cable Seal 6-10mm Our most popular horizontal entry cable seal For cables from 6-10mm (0.24”-0.39”) - Perfect for solar panels, light bars, lights and other rooftop electronics. £39.20 inc VAT Add to basket
Actisense Actisense A2K-FFC-RM NMEA 2000 Field Fit Connector – Right Angle Male Field fit connectors allow full customisation of your NMEA 2000 network cabling. Right Angled Male Version £44.81 inc VAT Add to basket
Actisense Actisense A2K-FFC-SF NMEA 2000 Field Fit Connector – Straight Female Field fit connectors allow full customisation of your NMEA 2000 network cabling. Straight Female Version £43.43 inc VAT Add to basket
Shakespeare Marine Shakespeare Gold Plated Brass connector UG176 adapter RG8X cable PL-259 connector with UG176 adapter & DooDad® for RG-8X cable. Gold-plated brass to better withstand the elements and to minimize traditional connector-borne signal loss. £30.89 inc VAT Add to basket
Shakespeare Marine Shakespeare Gold Plated Centerpin solderless PL259 connector Cable Splicer for RG-58 and RG-8/X cable. Blister packed. Full fitting instructions included. £30.32 inc VAT Add to basket
Maretron Maretron Adapter Micro Female to Deutsche 4 Pin 2 Male Cordset J2K100 adapter Micro female to Deutsch 4 Pin 2 Meter Cordset. £98.50 inc VAT View product
NASA NASA Marine Gas Detector comes with Gas sensor 850 to 1100mb (user adjustment to compensate for altitude). 0 to 360 degrees (in relative mode). Fail safe system warns user of system faults. Continuous performance monitor. Spare low cost plug in catalytic sensor - available. External output to drive ancillary equipment. 12 or 24 hour format. LEDs show system status continuously. Two tone alarm activates when gas level reaches 10% of lower explosive limit. £108.13 inc VAT Add to basket
Scanstrut ROKK Mini Rail Mount ROKK MINI RAIL MOUNT - Fits wide range of rails from 19mm – 34mm (¾ - 1¼”) Includes 3 x soft rail grip pad inserts for the perfect fit. £39.20 inc VAT Add to basket
NASA NASA MeteoMan Barometer Atmospheric Pressure Range: 850 to 1100mb (user adjustment to compensate for altitude). Pressure Trend: Rate of change of pressure for previous 24 hours in millibars per hour. Pressure History: 950 to 1050mb or 980 to 1030mb with 0.5mb resolution. Wind speed (when fitted with NMEA wind sensor) and Wind speed history. Wind direction (when fitted with NMEA wind sensor) in analogue and digital format. Real time clock with Race countdown timer and Stop watch with split timing. Outside temperature (when fitted with NMEA wind sensor) and Cabin temperature. Supply voltage: 9.0 to 15.0 volts. Operating current: 100mA (when fitted with NMEA wind sensor) / 150mA (with backlight illuminated) / Standby current - less than 10mA. Dimensions (WxHxD): 15.0 x 11.2 x 4.2 cm. £193.13 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 1m SeaTalk ng Backbone cable - 1 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £52.18 inc VAT Add to basket
Scanstrut Scanstrut TBH-10 Through Bulkhead Cable Seal 10 x 7mm The best through-bulkhead seal for multiple electrical cables. Provides IP67 waterproof cable routing and anchoring for up to for 10 x 7mm (0.39" x 0.27") cables and will fit to any bulkhead, from 10mm to 35mm (0.39" to 1.37") thickness. £55.85 inc VAT Add to basket
Raymarine Raymarine Blanking Plug SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £21.17 inc VAT Add to basket
Actisense Actisense NMEA 2000 Trunk / Drop Cable – 1m Available in various lengths, the cable assemblies can be used as either a drop cable from an NMEA 2000 backbone or to extend the length of the backbone trunk cable. 1m Cable £50.20 inc VAT Add to basket
Actisense Actisense NMEA 2000 Trunk / Drop Cable – 0.5m Available in various lengths, the cable assemblies can be used as either a drop cable from an NMEA 2000 backbone or to extend the length of the backbone trunk cable. 0.5M Cable £49.63 inc VAT Add to basket
Maretron Maretron Adapter Micro Female to Deutsche 12 Pin 2 T Cable J2K100 adapter Micro female to Deutsch 12 Pin 2 T cable. £194.52 inc VAT Add to basket
Raymarine Raymarine Extender SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £36.67 inc VAT Add to basket
Scanstrut ROKK Mini Cable Tie Rail Mount ROKK MINI CABLE TIE MOUNT - Over-size rail mount base which fits wide range of non-standard rail sizes Wherever and however you want to mount your electronics, there’s an option for you. £34.40 inc VAT Add to basket
