Raymarine Raymarine ST4000 Mk2 Clutch Kit Raymarine ST4000 MK2 Clutch Kit A18084. Replacement for grey Raymarine ST4000 MK2 Wheel Drive. £62.50 inc VAT Add to basket
Digital Yacht Digital Yacht NMEA 0183 to USB Adaptor Get NMEA data into your PC or MAC with this super stable interface. £65.60 inc VAT Add to basket
Digital Yacht Digital Yacht Cabling Starter Kit NMEA 2000 A simple and low-cost NMEA 2000 starter kit which allows for up to 3 devices to interconnect. £132.41 inc VAT Add to basket
Solar Technology Solar Technology 30W Rigid Solar Panel & Universal Fitting Kit This 30w PV Logic solar panel roof and deck top kit enables the solar panel to be professionally fitted to the roof of a caravan, motorhome, yacht or narrow boat. This roof top kit is supplied with a 30w PV Logic solar panel, our universal Alloy L Brackets, 10Ah dual battery charge controller, 4m cable, connectors, fuse, bonding agent, cable feed gland and detailed installation instructions. The 30w panel provides up to 195wh per day and is ideal for off grid caravan or boat trips over a long weekend where power demand is limited to DC lighting, device charging or low power appliances such as a radios etc. £195.00 inc VAT Add to basket
Actisense Actisense USG-2 NMEA 0183 to USB Serial Gateway The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network. The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus. £152.83 inc VAT Add to basket
NASA NASA Clipper Wireless Wind with MHU and Data Box The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Wind display or any other compatible NMEA display unit. The Clipper Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication. £436.70 inc VAT Add to basket
Garmin Garmin 12 Pin Transducer Extension Cable – 10ft (3m) Garmin 3m Transducer Extension Cable 12pin With XID. £55.00 inc VAT Add to basket
Maretron Maretron Tank Level Monitor 104”Depth Tanks Maretron's TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM200 calculates and broadcast the fluid level over the NMEA 2000® network, you can observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as Maretron's N2KView® vessel monitoring system, or Maretron's DSM150/DSM250 colour graphics displays. The TLM200 is capable of sensing fluid levels in tanks up to 104" (2.64m) in depth. It can be used for diesel, fresh water, waste water, black water, and oil tanks (see the TLM100 for a lower cost solution for tanks up to 40" and the TLM150 for gasoline tanks). Unlike most tank senders that only work with rectangular tanks, the TLM200 can be calibrated for irregular tank shapes so you can know the true fluid level in your tanks. The TLM200 is mounted directly to the top of tanks using the industry standard SAE J1810 5-hole mounting pattern. The TLM200 can also be mounted to tanks with threaded tank openings using an optional 1.5" NPT adapter. Most importantly, the TLM200 is NMEA 2000® certified so you can view any and all tank levels anywhere on the vessel when using a compatible NMEA 2000® display. The TLM200 is another key component of Maretron's N2KView® vessel monitoring and control system. £792.55 inc VAT Add to basket
Raymarine Raymarine ST4000+ Wheel Drive Clamp Kit Poke Clamp Kit for Autohelm 4000 Wheel Pilot or ST4000 Wheel Pilot. Wheel is black. Wheel is black £57.34 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Orange The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Actisense Actisense USG-2 USB Cable – USB to PC shielded cable USB cable accessory for use with the Actisense USG-2. Note: The USG-2 ships with this cable included in the box but it is also available as an accessory in case a replacement is needed. £27.10 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Solar Technology Solar Technology 30w Rigid Solar Panel Kit & 10Ah Charge Controller The 30 Watt Solar Panel Kit is ideal for use in caravans where the time spent away from a mains hook up is no more than 7 days. Also useful for charging more power hungry consumer appliances such lap top computers, TV’s etc. The 10Amp Dual Battery Charge Controller is for off-grid solar systems and has the additional functionality that it can charge to batteries simultaneously and can work on both 12v or 24v systems. £142.15 inc VAT View product
Garmin Garmin 4 Pin Dual Beam Transom Mount Transducer This dual beam transducer replaces the one included with your echo series fishfinder. A 500 W 4-pin transducer; an operating frequency of 77 to 200 kHz; a beamwidth of 45 to 15 degrees; and mounts on a 0 to 70 degree transom. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. £81.00 inc VAT Add to basket
Maretron Maretron Tank Level Monitor 24”Depth Gasoline Tanks Maretron's TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM150 calculates and broadcast the fluid level over the NMEA 2000® network, you can observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as Maretron's N2KView® vessel monitoring system, or by Maretron's DSM150/DSM250 colour graphics displays. The TLM150 is capable of sensing gasoline levels in tanks up to 24" (0.61m) in depth (see TLM100 for fluid types other than gasoline in tanks up to 40" or the TLM200 for tanks up to 104"). Unlike most tank senders that only work with rectangular tanks, the TLM150 can be calibrated for irregular tank shapes so you can know the true fluid level in your tanks. The TLM150 is mounted directly to the top of tanks using the industry standard SAE J1810 5-hole mounting pattern. The TLM100 can also be mounted to tanks with threaded tank openings using optional adapters that include both a 1.5" NPT and a 1.25" BSP adapter. The other important optional accessory for the TLM150 is the focus tube to permit use on boats with planing hulls, which is required if the vessel spends a significant amount of time with the bow pitched up. Most importantly, the TLM150 is NMEA 2000® certified so you can view any and all tank levels anywhere on the vessel when using a compatible NMEA 2000® display. The TLM150 is another key component of Maretron's N2KView® vessel monitoring and control system. £337.51 inc VAT Add to basket
