Garmin Garmin GT8HW-IH 8 Pin In Hull Transducer GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (<6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer features high-wide CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat. £170.78 inc VAT Add to basket
Raymarine Raymarine Pedestal Assembly 89mm 3.5″ Tiller Autopilot Pedestal Assembly 89mm, 3.5 Inch compatible with ST1000, ST2000, ST1000 plus, ST2000 plus and Evolution Tiller Drive. £124.13 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Garmin Garmin GT23M-TH 8 Pin Thru-Hull Transducer Perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £754.01 inc VAT Add to basket
Maretron Maretron MPower CKM to NMEA 2000 Cable – 0.2m This cable is used to connect Mareton MPower CKM Keypads to the NMEA 2000 network. £93.00 inc VAT Add to basket
Toughprint Toughprint Waterproof Paper-A4-Laserjet-250 Sheets Toughprint® paper is suitable for Colour and Black & White printers/copiers. The paper is ideal for printing maps for outdoor use as it is waterproof, resists crumples and tears and any moisture or dirt can be wiped clean. The micro porous surface delivers vibrant colours and crisp clear high definition photographic prints. Suitable for printing double sided and it is approximately 175gsm. £203.99 inc VAT Add to basket
Garmin Garmin GT23M-TM 8 Pin Transom Mount Transducer GT23M-TM transducer is perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £344.00 inc VAT Add to basket
Garmin Garmin GT21-TH 8 Pin Thru-Hull Transducer Perfect for coastal and offshore fishermen who want traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The CHIRP ClearVü element has a power rating of 500 W and operating frequencies of 260/455 kHz. The traditional sonar has a power rating of 600 W and operating frequencies of 50/200 kHz. It includes a built-in fast-response temperature sensor. For hull deadrises less than 25 degrees. GT21-TH includes an 8-pin transducer with stainless steel stem, fairing block, isolation plate and bushings, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. £524.00 inc VAT Add to basket
Oxford Oxford Bottle Stash Adjustable drinks and fuel bottle carrier designed to fit Oxford Fuel flask 1.5L & 1.0L and the Oxford Insulated Drinks Bottle 1.0L. £39.34 inc VAT Add to basket
Oxford Oxford Beast Chain – 22mm x 1.5m The Beast chain would not look out of place attached to a ships anchor. It is our largest and strongest chain, ever. The 22mm hardened steel chain links each weigh the same as a bag of sugar. The links are covered with a protective and reflective material sleeve. £194.00 inc VAT Add to basket
Oxford Oxford Beast Chain – 22mm x 2m The Beast chain would not look out of place attached to a ships anchor. It is our largest and strongest chain, ever. The 22mm hardened steel chain links each weigh the same as a bag of sugar. The links are covered with a protective and reflective material sleeve. £268.99 inc VAT Add to basket
Toughprint Toughprint Waterproof Paper-A4-Inkjet-25 Sheets Toughprint® paper is suitable for Colour and Black & White printers/copiers. The paper is ideal for printing maps for outdoor use as it is waterproof, resists crumples and tears and any moisture or dirt can be wiped clean. The micro porous surface delivers vibrant colours and crisp clear high definition photographic prints. Suitable for printing double sided and it is approximately 175gsm. £39.34 inc VAT Add to basket
Oxford Oxford Loam 20 Nylon Flat Pedals – Red Oxford Loam Flat Pedals have been designed with a wide surface area and narrow profile for maximum grip and reduced pedal strikes. The 20 removable pins can be adjusted to fine tune the preferred level of grip, offering control no matter the trail conditions or environment you ride. £47.99 inc VAT Add to basket
Oxford Oxford Beast Lock Some say that size doesn't matter. When it comes to locks, it matters! The Oxford BEAST is so big it comes with a health warning on the box: WARNING - HEAVY! The lock alone weighs 3.6KG £184.01 inc VAT Add to basket
Garmin Garmin NMEA 2000 Field-installable Connector – Male Use the male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables. £45.98 inc VAT Add to basket
Maretron Maretron MPower CKM 12 Button Keypad – Number on Button The new MPower® Series by Maretron replaces standard mechanical circuit and switches with state-of-the-art digital power distribution. Customers looking to achieve the power and convenience of advanced home automation for their boats will appreciate MPower’s seamless, reliable operation as well as simple and cost-effective installation. The CKM12 is a customizable keypad featuring laser-etched legends and dimmable LED function lights for each button. The LEDs also provide diagnostics when fault conditions are detected. £238.50 inc VAT Add to basket
