Raymarine Raymarine In-Line SeaTalk NG (STNG) Terminator Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system. £36.67 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Power Cable SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £41.83 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Backbone Cable 9m SeaTalk ng Backbone cable - 9 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £78.00 inc VAT Add to basket
Actisense Actisense A2K-FFC-RF NMEA 2000 Field Fit Connector – Right Angle Female Field fit connectors allow full customisation of your NMEA 2000 network cabling. Right Angled Female Version £44.69 inc VAT Add to basket
Actisense Actisense Female NMEA 2000 Terminator Actisense terminators are exceptionally robust to withstand the harsh conditions of the marine environment and have been designed for quick and easy installation. £32.21 inc VAT Add to basket
Raymarine Raymarine Blanking Plug SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £21.17 inc VAT Add to basket
Garmin Garmin Marine Network Cable – 20ft (6.1m) This marine network cable is 20 ft. (6.1 m) but also available in lengths of 6 ft. (1.83 m), 40 ft. (12.19 m) or 500 ft. (152.4 m) of cable length. £51.00 inc VAT Add to basket
Actisense Actisense A2K-FFC-SM NMEA 2000 Field Fit Connector – Straight Male Allows for secure, reliable connections in any NMEA 2000 installation using Micro cable. Provides full flexibility and easy to install . The perfect complement to the Actisense 100M Bulk Reel of cable. £43.97 inc VAT Add to basket
Garmin Garmin Marine Network Cable – 6ft (1.83m) This marine network cable is 6 ft. (1.83 m) but also available in lengths of 20 ft. (6.1 m), 40 ft. (12.19 m) or 500 ft. (152.4 m) of cable length. £40.99 inc VAT Add to basket
Veratron Veratron Go Data – NMEA 2000 BLE Bluetooth Gateway Bluetooth Gateway for the Veratron Go GPS GNSS Receiver allowing the visualization of NMEA 2000 boat data on your portable devices, such as smartphone or tablet. £184.01 inc VAT Add to basket
Veratron Veratron Go NMEA 2000 GPS GNSS Receiver Veratron GO is NMEA 2000 certified and features an integrated GPS/GLONASS/GALILEO receiver. Compact and easy to install, it does not require any additional protection against harsh weather conditions. One of the smallest GPS receivers available. £217.06 inc VAT Add to basket
Raymarine Raymarine Extender SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £36.67 inc VAT Add to basket
NASA NASA Target 2 Depth Display Only Replacement Nasa Marine Target Sounder display. Display Only, Transducer not included, Can not be used as a repeater display £116.90 inc VAT Add to basket
Veratron Veratron Top Mount Bracket for Go Sensor Optional extra surface mounting bracket for all GO series sensors. £28.80 inc VAT Add to basket
Actisense Actisense NMEA 2000 T Piece The quality engineered connectors are shaped to allow easy and secure connections, even when field fit connectors are used, making it a totally unique T piece. With two female and one male connector, the A2K-T-MFF can be easily connected to Actisense NMEA 2000 micro cable assemblies, available in various lengths with UL certified cable for unbeatable quality. £45.97 inc VAT Add to basket
