Q-Link Q-Link Brand Ball Chain Black 30” for Pendants Our Q-Link brand 30" color coded bead chains look especially great matched with Acrylic Pendants of the same color - and are an ideal, comfortable and practical alternative to the standard cord. Ultra-durable baked enamel coating is water-based, lead-free and non-toxic. £24.96 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Stainless 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RayNet (F) cable – 400mm 400mm Raynet to Raynet cable. £83.17 inc VAT View product
Q-Link Q-Link Brand Ball Chain Dynamic Red 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
Oxford Oxford CLIQR USB Converter CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £43.99 inc VAT Add to basket
Oxford Oxford CLIQR Mirror Replacement Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £43.99 inc VAT Add to basket
Oxford Oxford Tech Tube Cubed – 3 Pack The Tech Tube is a 3-pack of necktubes. A versatile all year-round staple, whether in deepest darkest Winter or an early summer morning ride the tube will provide wind resistant and UV protection. £33.55 inc VAT Add to basket
Oxford Oxford CLIQR USB Handlebar Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £67.33 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Oxford Oxford Loam 20 Nylon Flat Pedals – Red Oxford Loam Flat Pedals have been designed with a wide surface area and narrow profile for maximum grip and reduced pedal strikes. The 20 removable pins can be adjusted to fine tune the preferred level of grip, offering control no matter the trail conditions or environment you ride. £47.99 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RJ45 (M) cable – 3m 3m RayNet to RJ45 male cable. Length 3m. £83.17 inc VAT Add to basket
Oxford Oxford CLIQR Pivot Arm Converter CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £39.34 inc VAT Add to basket
NASA NASA Navtex Pro Engine with Series 2 Antenna Raymarine C & E Series Navtex Pro receiver with dual frequenct Navtex antenna for connection to PC or white version available to connect to Raymarine C & E Series Classic Plotters. £178.27 inc VAT View product
NASA NASA Navtex PC Pro Engine-USB comes with H Vector Antenna The PC Navtex USB is a two channel navtex receiver designed to operate on a personal computer. It will receive navtex messages even without the PC connected. Navtex messages are stored in a vast internal memory and available to download when the system is booted up. £202.46 inc VAT Add to basket
NASA NASA Target HF3/W SSB Receiver The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to 'get on the air'. Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies. The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant 'correcting' with the tuning knob so often associated with SSB signals as the receiver is fully synthesised. TARGET HF3/W. The HF3/W is complete with CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world. £311.16 inc VAT Add to basket
Oxford Oxford Tech Tube Pro Coolmax Reflex – Fluorescent Yellow The Oxford Tech Tube Pro is a Coolmax reflective neck tube. £33.55 inc VAT Add to basket
Q-Link Q-Link Brand Bead Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Oxford Oxford CLIQR – Pivot Arm Handlebar Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £62.66 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain White 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
Q-Link Q-Link Brand Waxed Cord Black Pack of 5 for Pendants Black waxed replacement cord for all Q-Link pendants. 5 per package. . £21.96 inc VAT Add to basket
Oxford Oxford CLIQR Suction Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £48.66 inc VAT Add to basket
