Railblaza Railblaza Camera Mount Adaptor The Camera Mount Adaptor from RAILBLAZA is the safe and secure option for holding your camera or GoPro on any kayak, canoe, bass boat, yacht and more. £30.70 inc VAT View product
NASA NASA Bluetooth Battery Monitor When you need a battery monitor but don't have space for the display or routing the cables would be a nightmare, there is now a solution. The BM-1(BT) will monitor your boat or caravan's lead-acid batteries and transmit the data directly to your mobile phone, or tablet, wirelessly by Bluetooth. £131.33 inc VAT Add to basket
NASA NASA Battery Monitor Compact Grey 24VDC The BM-1 compact is designed to monitor performance of 24 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the battery’s state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. In The Box BM-COMPACT; Precision 100 AMP shunt; Prefabricated cable assembly. £123.11 inc VAT Add to basket
Solar Technology Solar Technology 80W Flexi Solar Panel Kit & 10Ah Charge Controller Delivering up to 520wh per day, the PV Logic 80w flexi solar panel can fully charge an 85Ah battery on a sunny day in the UK summer. Perfect for off grid caravans, boats, motorhomes and a good choice where a smaller amount of power is needed during the dark days of winter. The 80w panel is a standard fit on some motorhomes, camper vans and boats. It is supplied with a 4m cable, terminals, fuse and detailed installation instructions. The 10Amp Dual Battery Charge Controller is for off-grid solar systems and has the additional functionality that it can charge to batteries simultaneously and can work on both 12v or 24v systems. £320.00 inc VAT Add to basket
Maretron Maretron MPower VMM to NMEA 2000 Cable – 0.2m This cable is used to connect Maretron MPower VMM Switch Modules to the NMEA 2000 network. £87.50 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Contains: Bike computer, GPS mount, Attachment material, USB-C cable, Quick-start instructions. £119.80 inc VAT Add to basket
Railblaza Railblaza MiniPort 6mm Screw mount 1 x MiniPort 6mm screw mount (for 2020 Red Paddle boards) £21.06 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Backbone Cable 9m SeaTalk ng Backbone cable - 9 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £78.00 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer Sensor Set – Black The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Bundle Contains: Bike computer, USB-C cable, Quick-start guide, R1 DUO Heatrate transmitter and chest strap, Overclamp Butler GPS Mount, DUO Magnetless Speed Sensor, DUO Magnetless Cadence Sensor. £232.99 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer HR Set – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Bundle Contains: Bike computer, USB-C cable, Quick-start guide, R1 DUo Heartrate transmitter and chest strap, Overclamp Butler GPS Mount. £163.80 inc VAT Add to basket
Echomax Echomax XS Ocean Mast Bracket – Active-XS / VHF / TV / GPS / AIS – 201mm A more robust mast bracket for Echomax Active X, Active XS and other smaller antennas such as the Shakespeare Active HDTV MAR8 & MAR10 TV antennas. £102.00 inc VAT Add to basket
JRC JRC Defender Compact Carryall The Defender Carryall has three large, zipped, external compartments to safely ensure all your essential gear such as scales, terminal tackle, food and camera are easy to access. £66.00 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Backbone Terminator SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £31.51 inc VAT Add to basket
Raymarine Raymarine Cantilever Socket Assembly The cantilever socket is used where it is necessary to attach the autopilot to a vertical surface such as the cockpit sidewall and to mount it horizontally. The cantilever rod has a length of L = 220 mm and may be shortened. When the autopilot is not in use, the cantilever may be unscrewed. £134.47 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Purple The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Raymarine Raymarine P79 Adjustable In-Hull Angle Compatible hull material: fiberglass. Max Power: 500W RMS (depending on connected SONAR). Frequency: 200/50 KHZ . Depth only. . Easily adjusts to any deadrise angle up to 22° . Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer . Can be removed in seconds for servicing or storage . Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy . Simplifies in-hull installation . £230.66 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Power Cable SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £41.83 inc VAT Add to basket
Echomax Echomax Active Deck Mount 100mm 1/14 TPI Male Echomax Active Deck Mount 100mm £66.00 inc VAT Add to basket
NASA NASA Battery Monitor Compact Grey 12VDC Based on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium.Caravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-1 Compact is supplied with a precision 100 Amp shunt and prefabricated cables to enable simple DIY installation. £123.11 inc VAT Add to basket
Maretron Maretron Mpower VMM6 – 6 x Momentary On – No Rockers The new MPower Series by Maretron replaces standard mechanical circuit breakers and switches with state-of-the-art digital power distribution. Customers looking to achieve the power and convenience of advanced home automation for their boats will appreciate MPower’s seamless, reliable operation as well as and cost-effective installation. £104.00 inc VAT View product
NASA NASA Battery Monitor BM2 Compact 12VDC 200amp BM-2 Compact is designed especially for applications where space is at a premium. It fully monitors performance of 12 volt lead acid battery systems with capacities of up to 999 Amp hours. The package is supplied complete with a precision 200 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. £143.57 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer Sensor Set – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Bundle Contains: Bike computer, USB-C cable, Quick-start guide, R1 DUO Heatrate transmitter and chest strap, Overclamp Butler GPS Mount, DUO Magnetless Speed Sensor, DUO Magnetless Cadence Sensor. £232.99 inc VAT Add to basket
Raymarine Raymarine Bronze B117 Low Profile Thru Hull transducer Compatible hull material: wood and fiberglass. Depth only. Max Power: 600 watts. Frequency: 200/50 KHZ . Cable: 9.1m/30ft. Hole diameter for installation: 2". £359.83 inc VAT View product
Raymarine Raymarine In-Line SeaTalk NG (STNG) Terminator Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system. £36.67 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
NASA NASA Battery Monitor Compact White 12VDC The BM-1 compact is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the battery’s state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. In The Box BM-COMPACT; Precision 100 AMP shunt; Prefabricated cable assembly. £123.11 inc VAT Add to basket
