Raymarine Raymarine Masthead Trans Service Kit (D) Replacement Vane and Windcups for the old ST50 and the earlier D windcup ST60 MHU. £67.67 inc VAT Add to basket
NASA NASA Battery Monitor Clipper BM-2 12VDC The BM-2 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 999 Amp hours. It is supplied complete with a precision 200 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. £144.18 inc VAT Add to basket
NASA NASA Navtex Pro Engine with Series 2 Antenna Raymarine C & E Series Navtex Pro receiver with dual frequenct Navtex antenna for connection to PC or white version available to connect to Raymarine C & E Series Classic Plotters. £178.27 inc VAT View product
Maretron Maretron Micro Double-Ended Cordset Male to Female 2m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. £65.51 inc VAT Add to basket
Garmin Garmin GT52HW-TM 12 Pin Transom Mount Transducer GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat. The 12-pin transducer features high wide band CHIRP traditional sonar and has a power rating of 250 W. The CHIRP ClearVü and CHIRP SideVü (455/800 kHz) elements have a power rating of 350 W each (1,050 W total). GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat. £344.00 inc VAT Add to basket
Raymarine Raymarine Wind Vane Service Kit Replacement Vane and Windcups for the ST60 MHU. £88.32 inc VAT Add to basket
NASA NASA Navtex PC Pro Engine USB with Series 2 Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to standard Nasa Navtex antenna supplied. Supply voltage 10 to 16 volts DC. Dimensions 115 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with PC CD software, USB connection lead, fused power cable and Series 2 active antenna. Compatible with Windows XP to 8. £178.27 inc VAT Add to basket
Garmin Garmin GT23M-TH 8 Pin Thru-Hull Transducer Perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £754.01 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 400mm SeaTalk ng Backbone cable - 0.4 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £52.18 inc VAT Add to basket
NASA NASA Battery Monitor Compact White 24VDC The BM-1 compact is designed to monitor performance of 24 volt lead acid battery systems with capacities of up to 600 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the battery’s state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. In The Box BM-COMPACT; Precision 100 AMP shunt; Prefabricated cable assembly. £123.11 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RJ45 (M) cable – 10m 10m RayNet to RJ45 male cable. £139.63 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 0.5m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and they are waterproof for continued operation even while submerged in the bilge. £54.52 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Backbone Terminator SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £31.51 inc VAT Add to basket
Raymarine Raymarine RayNet (F) to RayNet (F) cable – 400mm 400mm Raynet to Raynet cable. £83.17 inc VAT View product
Scanstrut ROKK Mini Rail Mount ROKK MINI RAIL MOUNT - Fits wide range of rails from 19mm – 34mm (¾ - 1¼”) Includes 3 x soft rail grip pad inserts for the perfect fit. £39.20 inc VAT Add to basket
Scanstrut ROKK Mini Surface Mount Wherever and however you want to mount your electronics, there’s an option for you. Rokk mini surface mount screw down base mount fits any flat surface. £29.60 inc VAT Add to basket
