Raymarine Raymarine Backbone Cable 5m SeaTalk ng Backbone cable - 5 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £67.67 inc VAT Add to basket
Oxford Oxford CLIQR Suction Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £48.66 inc VAT Add to basket
Oxford Sigma ROX 4.0 GPS Cycle Computer – White The ROX 4.0 bike computer can be positioned on the handlebars in a few easy steps. There is no need to mount cables or sensors.After it is switched on, the ROX 4.0 uses GPS and GLONASS to determine the biker's position in seconds. Along with the user-friendly operation with three buttons, this allows a bike tour to be started right away. Contains: Bike computer, GPS mount, Attachment material, USB-C cable, Quick-start instructions. £119.80 inc VAT Add to basket
NASA NASA 20 Metre Wind MHU Extension cable plug v1 20 metre long extension cable for wind instruments. £51.77 inc VAT Add to basket
Raymarine Raymarine Spur Cable 400mm SeaTalk ng Spur cable - 0.4 m. - Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. £52.18 inc VAT Add to basket
Oxford Oxford CLIQR Mirror Replacement Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £43.99 inc VAT Add to basket
Victron Victron VE.Direct Cable 3m ASS030530230: Victron Ve Direct Cable 3M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control. £31.01 inc VAT Add to basket
Oxford Oxford CLIQR Surface Device Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £39.34 inc VAT Add to basket
Oxford Oxford CLIQR USB Handlebar Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £67.33 inc VAT Add to basket
Oxford Oxford Loam 20 Nylon Flat Pedals – Red Oxford Loam Flat Pedals have been designed with a wide surface area and narrow profile for maximum grip and reduced pedal strikes. The 20 removable pins can be adjusted to fine tune the preferred level of grip, offering control no matter the trail conditions or environment you ride. £47.99 inc VAT Add to basket
Oxford Oxford E-Mirror – Right Designed to fit in-board of the e-bike controls and handlebar grip, the E-Mirror is out of the way when the need to lean a heavier e-bike against a wall arises. With aluminium bar clamps and a fully adjustable fit, this versatile mirror is equally at home on a conventional bike. £37.32 inc VAT Add to basket
Victron Victron VE.Direct Cable 10m ASS030530310: Victron Ve Direct Cable 10M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control. £35.02 inc VAT Add to basket
Oxford Oxford CLIQR USB Converter CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £43.99 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Purple The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
Garmin Garmin Actuator Power Cable Actuator Power Cable Replacement for GHP 12 Autopilot System £55.00 inc VAT Add to basket
Icom ICOM HM195G Command Mic Black -White LCD for M423GE The new optional HM195G Command Mic makes it convenient for using the IC-M423GE from a separate cabin or tower. The Command Mic can be positioned up to 18.3m (60ft) away from the IC-M423GE. All functions of the IC-M423GE, including power switch, distress call, DSC, and PA functions can be controlled from the Command Mic. The Command Mic can also be used as an intercom with the IC-M423GE. £219.01 inc VAT Add to basket
Oxford Oxford Ultratorch Cube-X LED Light Set The Cube-X builds on the success of its predecessor, increasing the diode count on the COB LED from 36 to an impressive 140. £45.86 inc VAT Add to basket
Oxford Oxford CLIQR – Pivot Arm Handlebar Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £62.66 inc VAT Add to basket
NASA NASA 7 Metre Coaxial Extension Cable 7 metre coaxial extension cable with moulded connectors. £31.66 inc VAT Add to basket
Oxford Oxford CLIQR Action Camera Mounts CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £29.99 inc VAT Add to basket
Oxford Oxford CLIQR Heavy Duty Surface Device Mount CLIQR uses a dual locking, fail-safe mechanism to mount almost any device in the most convenient position. Simply stick the CLIQR device adaptor onto the back of any device and CLIQR it into the mount in the orientation that suits. £39.34 inc VAT Add to basket
Oxford Oxford Driver Lock-On MTB Grips – Green The Oxford Driver Lock-on MTB Grip comes with a dual profile design to offer outstanding grip, comfort and control in all weathers. £31.99 inc VAT Add to basket
