Actisense Actisense NMEA 2000 Trunk / Drop Cable – 1m Available in various lengths, the cable assemblies can be used as either a drop cable from an NMEA 2000 backbone or to extend the length of the backbone trunk cable. 1m Cable £50.20 inc VAT Add to basket
Airmar Airmar DST800 P17 200BA 10m Cable Airmar 35-002-3-41 DST800 P17 Transducer with 10M Bare ends Cable The DST800 is an analog transducer that offers depth, speed, and temperature functions in one compact thru-hull fitting. £372.00 inc VAT View product
Toughprint Toughprint Waterproof Paper-A4-Laserjet-25 Sheets Toughprint® paper is suitable for Colour and Black & White printers/copiers. The paper is ideal for printing maps for outdoor use as it is waterproof, resists crumples and tears and any moisture or dirt can be wiped clean. The micro porous surface delivers vibrant colours and crisp clear high definition photographic prints. Suitable for printing double sided and it is approximately 175gsm. £39.34 inc VAT Add to basket
NASA NASA Wind Vane Kit White Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units. £34.30 inc VAT Add to basket
NASA NASA Clipper Close Haul Meter This connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sailing close to - or running with the wind. Complete with 5M cable. £111.65 inc VAT Add to basket
Railblaza Railblaza StarPort – Black The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Toughprint Toughprint Waterproof Paper-A4-Inkjet-250 Sheets Toughprint® paper is suitable for Colour and Black & White printers/copiers. The paper is ideal for printing maps for outdoor use as it is waterproof, resists crumples and tears and any moisture or dirt can be wiped clean. The micro porous surface delivers vibrant colours and crisp clear high definition photographic prints. Suitable for printing double sided and it is approximately 175gsm. £203.99 inc VAT Add to basket
Solar Technology Solar Technology 80W Flexi Solar Panel Kit Delivering up to 520wh per day, the PV Logic 80w flexi solar panel can fully charge an 85Ah battery on a sunny day in the UK summer. Perfect for off grid caravans, boats, motorhomes and a good choice where a smaller amount of power is needed during the dark days of winter. The 80w panel is a standard fit on some motorhomes, camper vans and boats. It is supplied with a 4m cable, terminals, fuse and detailed installation instructions. NOTE – A charge controller will be needed to protect a battery from reverse feed and overcharging. £280.00 inc VAT Add to basket
Railblaza Railblaza StarPort HD The StarPort HD is designed to fit the same mount base pattern of Scotty, Ram, Cannon, and many other brands. £28.10 inc VAT Add to basket
Railblaza Railblaza 19-25mm Rail Mount StarPort Combo – Black The RAILBLAZA RailMount combo 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment. £38.50 inc VAT Add to basket
Shakespeare Marine Shakespeare Stainless Steel Squatty Body DAB Antenna – 0.9m Sealed, tin-plated copper wire coil. Designed specifically for DAB transceivers. SO-239 connector. Stainless steel L-shaped bracket supplied for mounting. For DAB applications. One Section. £97.36 inc VAT Add to basket
NASA NASA Wind Cups White Spare wind anemometer cup kit. Spare anemometer cup assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units. £34.30 inc VAT Add to basket
Garmin Garmin GT8HW-IH 8 Pin In Hull Transducer GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (<6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer features high-wide CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat. £170.78 inc VAT Add to basket
Garmin Garmin NMEA 2000 Field-installable Connector – Male Use the male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables. £45.98 inc VAT Add to basket
Actisense Actisense NMEA 2000 Protective Screw Cover – Female 10 Pack Protective screw on cover for NMEA 2000 Female end connectors. Pack of 10 £33.77 inc VAT Add to basket
Shakespeare Marine Shakespeare Stainless Steel AM/FM Antenna – 0.9m 0.9m (36″) low-profile stainless steel yacht AM/FM antenna. This lightweight, low profile, stainless steel antenna is specially designed for masthead mounting. £64.69 inc VAT Add to basket
Garmin Garmin GT8HW-IF 4 Pin Ice Fishing Transducer The GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation. £170.78 inc VAT View product
Railblaza Railblaza E Series USB Starport The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer. £45.43 inc VAT Add to basket
Airmar Airmar DST800 P17 Smart Sensor 235kHZ NMEA 0183 Airmar 44-072-2-41 DST800 P17 Smart Sensor NMEA 0183 With Bare Cable Ends The DST800 is a Smart, TRIDUCER® Multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. The DST800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000® display or network. Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled. £1,017.00 inc VAT Add to basket
NASA NASA Clipper True Wind Repeater True wind display unit - The Clipper True Wind Display shows apparent wind speed and direction and, when connected to a log or GPS, it can also show true wind speed and direction. Display Unit Supply voltage nominal 12 Volts Supply current 10mA + (10mA for back light illumination Max) NMEA input sentence MWV Back light - 9 levels Pointer style - 2 Display wind speed - 0 to 99 Kts Display Wind angle - 0 to 360 degrees represented by 60 segments Display case size 110 x 110mm NMEA boat speed input either VHW from log or RMC from GPS for True wind speed and direction. £136.30 inc VAT Add to basket
