Maretron Maretron Fuel Flow Monitor FFM100 converts a variety of flow senders (e.g., fuel, water, etc.) to NMEA 2000ยฎ Network Data. All flow senders ordered separately depending on application (i.e., single fuel flow sender for gas engine, dual fuel flow senders for diesel engine, water flow sender for sea water, etc.). Fuel flow senders facilitates fuel consumption optimization for reduced fuel operating cost. Fuel flow senders use positive displacement metering technology for superior accuracy over other measurement technology such as turbine meters. Fuel flow senders do not require costly fuel conditioning components like flow straighteners and pulse dampers. Fuel flow senders implement true temperature compensation with precision built-in thermistors for increased accuracy. Fuel flow senders automatically detect reverse flow due to fluctuating pressure difference from injection pumps. Fuel flow senders pass particle sizes up to 70 micrometres (diesel fuel filters normally filter down to 2 micrometres to prevent clogging injectors). £491.51 inc VAT View product
Actisense Actisense NMEA 2000 T Piece The quality engineered connectors are shaped to allow easy and secure connections, even when field fit connectors are used, making it a totally unique T piece. With two female and one male connector, the A2K-T-MFF can be easily connected to Actisense NMEA 2000 micro cable assemblies, available in various lengths with UL certified cable for unbeatable quality. £45.97 inc VAT Add to basket
Actisense Actisense USG-2 USB Cable – USB to PC shielded cable USB cable accessory for use with the Actisense USG-2. Note: The USG-2 ships with this cable included in the box but it is also available as an accessory in case a replacement is needed. £27.10 inc VAT Add to basket
Digital Yacht Digital Yacht GPS160 With iKonvert NMEA 2000 Bundle The GPS160 supplied with iKonvert (NMEA2000-NMEA0183 converter) allowing easy and flexible NMEA 2000 installation.โ £334.01 inc VAT View product
Actisense Actisense USBKIT-PRO NMEA 0183 Serial to USB Cable Serial to USB cable assembly. Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA 0183 data to a PC from another manufacturers device, the Actisense USG-2 is recommended. £54.36 inc VAT Add to basket
Maretron Maretron GPS Antenna Receiver GPS200 - NMEA 2000ยฎ GPS Antenna/Receiver Maretron's GPS200 is a state-of-the-art 32 channel GPS antenna and receiver capable of providing five position fixes per second, accurate boat speed four times per second, and precision time once per second. An additional benefit of the GPS200 is that it broadcasts precision magnetic variation information using the current position and world magnetic model (WMM-2010). The GPS200 antenna/receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000ยฎ Standard. It will directly connect to any NMEA 2000ยฎ network and communicate with navigational software, chart plotters, autopilots and dedicated instrument displays - such as Maretron's N2KViewยฎ vessel monitoring system, or by Maretron's DSM150/DSM250 colour graphics displays, and its compact, waterproof housing provides years of reliable performance. The GPS200 automatically decodes GPS correction signals from Satellite Based Augmentation Systems (SBAS) including the North American Wide Area Augmentation System (WAAS), the European Geostationary Navigation Overlay System (EGNOS), or the Asian Multifunctional Transport Satellite-based Augmentation System (MSAS) to provide better than 2.5m accuracy. The GPS200 is easily mounted to any 1" standard marine mount with its standard 1"-14 male threads. It can also be mounted directly to a deck, or even (due to it's unprecedented sensitivity) underneath a fibreglass deck. £491.51 inc VAT Add to basket
Maretron Maretron Mini Tee Mini Male left Mini Female bottom Mini Female right Gold Contacts for greatest reliability . Keyed connectors for error-free connections . £65.51 inc VAT View product
Actisense Actisense A2K-TER-U NMEA 2000 Smart Universal Micro Terminator The worldโs first intelligent universal in-line terminator. Terminate your NMEA 2000 network โ regardless whether a male or female connection is required โ and use the TER-Uโs smart functionality to easily troubleshoot any power or voltage issues on your NMEA 2000 bus. The TER-U can be fitted directly at the end of your network or used as an in-line terminator in difficult to access locations. £53.69 inc VAT Add to basket
Actisense Actisense RS-232 9 Pin D type Serial Cable to bare ends RS-232 9 Pin D type Serial Connector with Cable and bare wire ends £27.44 inc VAT Add to basket
Actisense Actisense A2K-4WT NMEA 2000 4 Way Connector This 4 Way T-Piece from Actisense saves you time, space and money on your NMEA 2000 installation. £123.19 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 10m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. £98.50 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Power Cable SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. Thereโs a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldnโt be easier with SeaTalk ng. £41.83 inc VAT Add to basket
Maretron Maretron Micro Double-Ended Cordset Male to Female 6m Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. £87.50 inc VAT Add to basket
Digital Yacht Digital Yacht Navlink 2 Nmea 2000 To Wifi Gateway NavLink 2 is an easy to fit NMEA2000 to WiFi server designed to make NMEA2000 navigation data available for apps on smartphones, tablets, iPads and PCs. £272.00 inc VAT Add to basket
Maretron Maretron NMEA 2K Mini/Micro Tee – Mini M & F Sides & Micro F Bottom Gold Contacts for greatest reliability . Keyed connectors for error-free connections . £65.51 inc VAT Add to basket
Digital Yacht Digital Yacht Cabling Starter Kit NMEA 2000 A simple and low-cost NMEA 2000 starter kit which allows for up to 3 devices to interconnect. £132.41 inc VAT Add to basket
Maretron Maretron Micro Inline Terminator Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. In cases where the gender is reversed, a female terminator may be required. The inline terminator is used where the network is terminated at a product, for example a GPS or weather station at the top of a mast. . £43.49 inc VAT Add to basket
Actisense Actisense DIN Rail Mounting Kit For use with the EMU-1, NDC-5 & NBF-3. Suitable for use with a top hat rail, type EN50 022 or a G section rail, type EN 50 035. The EMU-1 can be mounted horizontally (recommended) or vertically. £31.67 inc VAT Add to basket