Marine equipment, parts and chandlery in stock, with support from the Flood Marine team in Omagh.
Furuno
Fluxgate magnetic sensor with enhanced stability by a solid-state rate gyroscope. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-700 virtually maintenance-free and easy to install. The PG-700 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in CAN bus network.
Raymarine
Raymarine Acu-100 Actuator Control Unit With the ACU-100 Raymarine brings the exceptional performance of Evolution Autopilots to sport boats, runabouts and smaller cruising yachts. Specifically designed to complement Raymarine’s unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor. As a true world-first innovation, the ACU-100 is fully sealed so may be mounted above decks on boats where space is limited.
Furuno
Bottom type is a key point for fishing. Bottom species usually move according to the bottom type (mud, gravel, sand or rock). By connecting an existing echo sounder to TZ Professional, It will be able to record not only the depth (3D Bathymetric charts) but also the hardness! This will allow the user to deduce the bottom type! Note: Software Module Only, Requires TZ Profesional & PBG Software Module
Furuno
S-63 charts are encrypted charts in the S-57 file format that respect all the standards set by the International Hydrographic Organization (IHO). "S-63" Refers to the encryption standard under which the charts are protected. Note: Software Module Only, Requires TZ Profesional
Scanstrut
Scanstrut's SPD-4XI-W allows installation of multiple Instruments on virtually any flat surface on board. This allows the instruments to be in the prime position while out sailing on any powerboat or RIB. With the pull of a lever, the intuitive design gives a 360-degree viewing angle to make the most from what the instruments have to offer.
Veratron
The EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analogue engines, thanks to the analogue input ports provided and designed for: RPM data, 0-400 Ohm sensors and 4-20mA sensors.
Raymarine
The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customise with digital, analogue and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours.
Lowrance
Furuno
Scanstrut
Maretron
Maretron’s N2KView is completely user-configurable to create different screens for the vessels exact needs while easily switching from screen to screen for monitoring all of the systems data. Digital displays, analogue gauges, graphic displays, warning lights, and bar graphs, all can be configured. Set the operating limits and colour bands for analogue gauges to clearly show when things are within limits and when they are not.
Maretron
The new MPower Series by Maretron replaces standard mechanical circuit breakers and switches with state-of-the-art digital power distribution. Customers looking to achieve the power and convenience of advanced home automation for their boats will appreciate MPower's seamless, reliable operation as well as simple and cost-effective installation. The Maretron CLMD12 offers 12 programmable DC electronic load modules in an innovative, scalable configuration, capable of switching up to 5, 10, or 12 Amps with a total current capacity of 75 Amps. The CLMD12 provides fast switching and low-loss solid state ON/OFF switches.
Raymarine
Raymarine
Easy Installation - A typical installation can be done in just a few hours, with your rig in place and your boat still in the water. And there's no need for holes in the bulkhead or wires down the mast. Self-powering - Solar powered with integrated lithium batteries that power the unit for life. Power consumption is so efficient that units can run autonomously for up to 300 hours. Lightweight - The elimination of wires in the mast not only reduces spar weight but also lowers the boat's centre of gravity, giving significant and immediate performance advantage. Portability - Using clip-in cradles, your display can be placed anywhere on your boat, allowing you to view the information where and when you need it. Waterproof - Sealed for life and completely waterproof (submersible to 10m). This also means no condensation. Raymarine Wireless for Racing - Receive and display precise data wirelessly from Hull and Wind transmitters, including polar data, true wind speed and angle, VMG and compass heading.
Raymarine
The CAM300 mini day/night IP camera is a wide field-of-view visible camera designed for Raymarine Axiom chartplotters. Equipped with an HD video sensor, the CAM300 transforms Axiom into a powerful onboard video observation system. Use the CAM300 to monitor blind spots, check in on the crew, or watch and record all fishing action from the helm.
Raymarine
Raymarine
The Raymarine p70Rs autopilot control head, with its combination of push-buttons and rotary control dial, is aimed at powered craft. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast.
Scanstrut
Osculati
Developed for and tested on offshore race boats the SuperSport Series compasses feature the PowerDamp Plus dial. This dial technology features the PowerDamp dial skirt to prevent oscillation, larger DirectiveForce magnets for quick lock on and extra-large steel pivots and jewels for smooth fast action.
Osculati
Developed for and tested on offshore race boats the SuperSport Series compasses feature the PowerDamp Plus dial. This dial technology features the PowerDamp dial skirt to prevent oscillation, larger DirectiveForce magnets for quick lock on and extra-large steel pivots and jewels for smooth fast action.
Maretron
DCM100 Direct Current Monitor. Maretron’s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don’t have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron’s N2KView vessel monitoring and control system.
Raymarine
Garmin
Garmin
Add stunningly clear Ultra High-Definition ClearVü and Ultra High-Definition SideVü scanning sonar images to your compatible chartplotter via the GCV™ 20 sonar module. It includes three arrays, including a downward-facing element (800 kHz UHD ClearVü, 1200 kHz UHD SideVü).
