Description
Airmar 20-364-03 Install Kit for B17/DST800 Bronze tranducers
Including blanking plug & housing.
Compatible & Related Products
Useful compatible products and accessories recommended for this item.
Airmar
Airmar 12m B175H 12degree Depth Temperature XIDT 130-210D kHz NC
Airmar 41-535-1-02 B175H 12' Tilted Thru-Hull DT Transducer with Bare ends cable 12' tilted version for 16' to 24' hull deadrise Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High frequency also delivers amazing target separation on baitfish and schooling gamefish. The B175H delivers up to 80 kHz of total bandwidth in just one installation, and provides superior shallow water performance and bottom detail. The B175H transmits across High Frequency 130 to 210 kHz and the tilted element transducers have the element fixed at either a 20°, 12° or 0° angle within the transducer housing. Because the transducer is installed almost flush to the hull, when the transducer is installed the tilt corrects for the hull deadrise and orients the ceramic element horizontally to assure maximum echo returns to the transducer.
Garmin
Garmin Airmar B175H 20° Tilt 8 Pin Bronze Thru-Hull Transducer
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Garmin
Garmin Airmar B175L 12° Tilt 8 Pin Bronze Thru-Hull Transducer
Garmin 010-11938-21 B175L 1kW Chirp Ready Thru-Hull Transducer with 8 Pin Garmin Connector Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The B175L transducer delivers up to 20 kHz of total bandwidth in just one installation and delivers tremendous deep water performance.
Garmin
Garmin Airmar B175H 12° Tilt 8 Pin Bronze Thru-Hull Transducer
Garmin 010-11937-21 B175H Chirp-Ready Thru-Hull Transducer with Garmin 8 Pin Connector Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High frequency also delivers amazing target separation on baitfish and schooling gamefish. The B175H delivers up to 80 kHz of total bandwidth in just one installation, and provides superior shallow water performance and bottom detail.
