Description
- Bare ends cable
- Cone 9′
- Frequency 200kHz
- 500 W RMS power rating is at 2% duty cycle.
- Broadband with low Q of 2.
- Minimal sidelobes for concentrated energy on target providing excellent definition.
- Short threaded stem simplifies attaching to portable-mounting apparatus.
- Internal transformer provides impedance match to echosounder and allows use of longer cable.
- Robust stainless-steel housing.
Compatible & Related Products
Useful compatible products and accessories recommended for this item.
Airmar
Airmar SS510 DT 200Khz Echo Range Sensor 20m
Airmar 44-186-2-01 SS510 DT 200kHz EchoRange Stainless Steel Smart Sonar Airmar’s commitment to innovative technology has produced the SS510. This broadband 200 kHz transducer has a Q of 2 and very good sensitivity. It enables users to perform accurate surveys in shallow-water with high resolution. This transducer can also be “chirped” with a long pulse over a wide-frequency band. Users with adjustable-frequency echosounders will be able to regulate the operating frequency and tailor the beamwidth to specific survey conditions.
Airmar
Airmar SS164 DT XDI 50/200 0 Deg 2m Cable 9pin Male M&M
Airmar 41-498-1-01 SS164 50/200 1KW Transducer with Humminbird 9 pin connector 0' version for 0' - 7' hull deadrise Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot accomodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing providing the perfect vertical beam with maximum energy on what is directly below the boat.
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Airmar
Airmar SS505 Transducer Thru Hull Depth only stainless housing
The SS505 is a compact, impact resistant, stainless steel stem for use on all hulls. The dual-frequency version provides good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz. The narrow-beam 200 kHz version provides excellent bottom detail. Airmar’s High-Performance Fairings are recommended for all installations to obtain the best possible performance.
Airmar
Airmar SS60 50/200A Thru Hull DST 20 Tilt 2M cable 5 Pin Mix/Match
Airmar 31-704-1-01 SS60 50/200 DST 20' Tilt Thru Hull Transducer with 5 Pin Female Connector 20' Tilted version for 16' to 24' hull deadrise The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular tilted element feature. Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.
Airmar
Airmar SS617V DT800 DST800 Stainless Steel Housing
Airmar 33-617-01 SS617V Stainless Steel Housing for DT800 & DST800 Transducers. High quality stainless steel low-profile housing with inegrated valve assembly. Fits: Airmar DT800, DST800, ST950, DST900, and Smart Transducers
