Description
This plastic in-hull transducer with an adjustable deadrise angle makes installation a snap.
The NMEA 2000 100 W transducer has a depth of 500 ft; an operating frequency of 235 kHz; a beamwidth of 6 degrees; and a 0 to 22 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Garmin
Garmin
Garmin GT15M-IH 8 Pin In Hull Transducer
GT15M-IH transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for boats traveling at high speeds that want to maintain accurate depth readings. The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat. .
Garmin
Garmin GT8HW-IH 8 Pin In Hull Transducer
GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (<6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer features high-wide CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat.
Garmin
Garmin Airmar P19 20° Tilt 8 Pin Thru-Hull Transducer
Garmin 010-10218-22 Airmar P19 Thru-Hull 200kHz Transducer with Garmin 8 Pin Connector 20° Tilted verstion for 16°-24° deadrise This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Do not use on wood hulls.
