Description
- NMEA 2000 Network Interface
- Super loud 105dB audible alarm
- Bright Red LED visual alarm
- Green LED status indicator
- Multiple selectable alarm patterns
- Waterproof – Can be mounted indoors or outdoors
Maretron’s ALM100 alarm module generates visual and audible alerts for any monitored condition. The alarm module includes an extremely loud 105 dB SPL Piezoelectric sounder along with a red high-brightness LED to indicate an alarm condition. A second green LED incidates that the Alarm Module is powered and ready to be triggered. The audible alarm can sound any one of 32 distinct pre-programmed patterns to indicate different alerts. The Alarm Module can be triggered by alarms generated by Maretron’s N2KView vessel monitoring system or by Maretron’s DSM250 / DSM410 color graphics displays.
The Alarm Module mounts in a standard electric box or can be flush mounted on any surface. It is completely waterproof and can be mounted inside or outside the vessel.
Best of all the ALM100 is NMEA 2000 certified so you can install alarms anywhere on the vessel. The ALM100 is a key component of Maretron’s N2KView vessel monitoring and control system.
Compatible & Related Products
Useful compatible products and accessories recommended for this item.
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Maretron
Maretron Alternating Current Monitor includes M000630
NMEA 2000® Interface. Waterproof Connectors. Sealed Waterproof Enclosure. Opto-Isolated from NMEA 2000® Eliminating Potential Ground Loops. Monitoring of busses carrying AC power and transmitting: Voltage & Frequency. Monitoring AC Power Sources such as Utilities and Generators and transmitting: Voltage, Current, Frequency, Real Power, Reactive Power, Apparent Power, Power Factor, Total Energy Imported & Exported.
Maretron
Maretron
Maretron NMEA 2000 Mid Bulk Cable – Blue 100M
Mid bulk cable is primarily used as drop cable, but it can also be used at the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths.
Maretron
Maretron Direct Current Monitor
DCM100 Direct Current Monitor. Maretron’s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don’t have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron’s N2KView vessel monitoring and control system.
