Description
- 1 x SeaTalkNG Spur Cable – 1M
- 1 x Devicenet Female Adaptor Cable – 0.4m
- 1 x 5-Way SeaTalkNG Connector
- 1 x SeaTalkNG Power Cable – 2m
- 2 x SeaTalkNG Backbone Terminator
The Raymarine NMEA2K STNG gateway cable kit is an all in one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system.
Compatible & Related Products
Useful compatible products and accessories recommended for this item.
Raymarine
Raymarine SeaTalk NG (STNG) Backbone Kit
SeaTalkNG is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables.
Raymarine
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Raymarine
Raymarine SeaTalk NG (STNG) Backbone Cable 9m
SeaTalk ng Backbone cable - 9 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.
Raymarine
Raymarine
Raymarine SeaTalk (ST1) to SeaTalk NG (STNG) Convertor only
Raymarine’s proprietary network design released at the same time as NMEA0183 that had several key advantages. SeaTalk1 is included in many Raymarine MFDs and instruments to provide legacy support but now NMEA 2000 offers several advantages over SeaTalk1.
Raymarine
Raymarine SeaTalk NG (STNG) Starter Kit
SeaTalk ng Starter Kit - The SeaTalk ng Starter Kit is the perfect way to get started with your SeaTalk ng compatible Raymarine product. The 5-way connector forms the start of your SeaTalk ng backbone and your SeaTalk ng product is connected via a Spur Cable. What's in the kit? A06064: SeaTalk ng 5-way Connector A06031: SeaTalk ng Backbone Terminator (x2) A06040: SeaTalk ng Spur Cable 3m A06049: SeaTalk ng Power Cable SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.
