NASA NASA Navtex Pro Engine with Series 2 Antenna Raymarine C & E Series Navtex Pro receiver with dual frequenct Navtex antenna for connection to PC or white version available to connect to Raymarine C & E Series Classic Plotters. £178.27 inc VAT View product
NASA NASA 20 Metre Wind MHU Extension cable bare v2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs. £51.77 inc VAT View product
Railblaza Railblaza StarPort HD The StarPort HD is designed to fit the same mount base pattern of Scotty, Ram, Cannon, and many other brands. £28.10 inc VAT Add to basket
NASA NASA Navtex PC Pro Engine USB with Series 2 Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to standard Nasa Navtex antenna supplied. Supply voltage 10 to 16 volts DC. Dimensions 115 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with PC CD software, USB connection lead, fused power cable and Series 2 active antenna. Compatible with Windows XP to 8. £178.27 inc VAT Add to basket
Q-Link Q-Link Brand Waxed Cord Black Pack of 5 for Pendants Black waxed replacement cord for all Q-Link pendants. 5 per package. . £21.96 inc VAT Add to basket
Raymarine Raymarine Pushrod Extension 127mm 5″ Raymarine pushrod extension that fits any Raymarine tiller pilot system. . £62.50 inc VAT View product
Q-Link Q-Link Brand Bead Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Raymarine Raymarine SeaTalk NG (STNG) Power Cable SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £41.83 inc VAT Add to basket
Railblaza Railblaza 19-25mm Rail Mount StarPort Combo – Black The RAILBLAZA RailMount combo 19-25 is a base mount that allows the secure and easy attachment of any RAILBLAZA accessories to your rails. The RailMount can be fitted to round boat rails, as well as to kayaks and other marine equipment. £38.50 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Stainless 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
Garmin Garmin Airmar P319 8 Pin Thru-Hull Transducer When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required. £214.01 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 1m SeaTalk ng Backbone cable - 1 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng. £52.18 inc VAT Add to basket
Garmin Garmin GT30-TH 12 Pin Thru-Hull Transducer Perfect for the shallow water fisherman who want CHIRP ClearVü and CHIRP SideVü scanning sonar with a stainless steel stem, this 12-pin thru-hull transducer consistently displays clear definition of objects, structure and fish below and to each side of the boat. £664.01 inc VAT View product
Raymarine Raymarine P79 Adjustable In-Hull Angle Compatible hull material: fiberglass. Max Power: 500W RMS (depending on connected SONAR). Frequency: 200/50 KHZ . Depth only. . Easily adjusts to any deadrise angle up to 22° . Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer . Can be removed in seconds for servicing or storage . Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy . Simplifies in-hull installation . £230.66 inc VAT Add to basket
NASA NASA 7 Metre Coaxial Extension Cable 7 metre coaxial extension cable with moulded connectors. £31.66 inc VAT Add to basket
Garmin Garmin GT8HW-IF 4 Pin Ice Fishing Transducer The GT8HW-IF transducer is perfect for ice fishermen who want clear bottom definition under the ice as well as crisp, clear and wide fish arches with excellent target separation. £170.78 inc VAT View product
Raymarine Raymarine Tiller Bracket 25mm 1″ 1 Inch Tiller Bracket For All Raymarine Tiller Pilots. £88.34 inc VAT Add to basket
Raymarine Raymarine Backbone Cable 5m SeaTalk ng Backbone cable - 5 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. £67.67 inc VAT Add to basket
Raymarine Raymarine Adaptor Cable 25 pin to 7 pin Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV. £83.17 inc VAT Add to basket
Raymarine Raymarine SeaTalk (ST1) to SeaTalk NG (STNG) Female Spur Cable – 1m ST1 Adaptor Cable (3 Pin) - 39.4in (1.0m). £36.67 inc VAT Add to basket
Garmin Garmin GT30-TM 12 Pin Transom Mount Transducer Weight: 1.08 lbs. (0.50 kg). Cable length: 20’. Number of pins on connector: 12. Dimensions: Transducer: 7.8 x 1.5 x 0.9 in (198 x 38 x 22 mm). Frequency: DownVü: CHIRP 425-485 kHz and CHIRP 790-850 kHz, SideVü: CHIRP 425-485 kHz and CHIRP 790-850 kHz. Max Depth: DownVü: 750 ft, SideVü: 500 ft. Transmit power: DownVü: 500 W, SideVü: 500 W. £203.99 inc VAT Add to basket
Garmin Garmin GT23M-TM 8 Pin Transom Mount Transducer GT23M-TM transducer is perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £344.00 inc VAT Add to basket
Garmin Garmin GT21-TH 8 Pin Thru-Hull Transducer Perfect for coastal and offshore fishermen who want traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The CHIRP ClearVü element has a power rating of 500 W and operating frequencies of 260/455 kHz. The traditional sonar has a power rating of 600 W and operating frequencies of 50/200 kHz. It includes a built-in fast-response temperature sensor. For hull deadrises less than 25 degrees. GT21-TH includes an 8-pin transducer with stainless steel stem, fairing block, isolation plate and bushings, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. £524.00 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain White 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
Raymarine Raymarine Adaptor Cable 25 pin to 8 pin Adaptor Cable (25 pin to 8 pin) to attach an existing 8 pin Airmar (CP370 style connector) transducer to Axiom RV. £83.17 inc VAT View product
NASA NASA Alarm Buzzer Unit Alarm buzzer for the Clipper, Target or Cruiser Depth sounders. £22.88 inc VAT Add to basket
Railblaza Railblaza E Series USB Starport The E Series USB StarPort combines a USB connector within our StarPort base allowing you to charge your tablets, mobile phones and many other devices. It is designed for use on a 12 VDC supply, rated at 2.1Amps. For charging only and not for data transfer. £45.43 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Dynamic Red 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £24.96 inc VAT Add to basket
NASA NASA BT3 Bluetooth Navtex S2 Antenna 518 and 490kHz message reception. 12 volt supply with low 27mA current consumption. Connects to H Vector or standard Series 2 antenna. Supply voltage 10 to 16 volts DC. Dimensions 135 x 100 x 30mm. Antenna length 195mm (complete with 7 metre cable). Supplied with active antenna, fused power cable and downloadable android app. Compatible with Android phones and tablets. £190.63 inc VAT Add to basket
Garmin Garmin GT8HW-IH 8 Pin In Hull Transducer GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (<6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer features high-wide CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat. £170.78 inc VAT Add to basket
Garmin Garmin GT23M-TH 8 Pin Thru-Hull Transducer Perfect for coastal and offshore fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features mid-band CHIRP traditional sonar (80-160 kHz) and has a power rating of 600 W. The CHIRP ClearVü (260/455 kHz) element has a power rating of 500 W. For installation, follow the included instructions carefully to avoid damaging your boat. £754.01 inc VAT Add to basket
Railblaza Railblaza StarPort – Black The StarPort from RAILBLAZA is a versatile and unique mounting bracket that allows for the attachment of marine accessories such as rod holders to your boat, railings, kayak, inflatable, and other surfaces. £28.10 inc VAT Add to basket
Q-Link Q-Link Brand Ball Chain Black 30” for Pendants Our Q-Link brand 30" color coded bead chains look especially great matched with Acrylic Pendants of the same color - and are an ideal, comfortable and practical alternative to the standard cord. Ultra-durable baked enamel coating is water-based, lead-free and non-toxic. £24.96 inc VAT Add to basket
Garmin Garmin 6 Pin Transducer to 8 Pin Sounder Connector Block Garmin 8Pin Female to Wire Block Adapter. £81.00 inc VAT Add to basket
Raymarine Raymarine CPT-S Plastic CHIRP Thru Hull Transducer – 12° Element Plastic Thru-Hull 12° Angled Element CHIRP Sonar Transducer. 12° Element for 7-17° Deadrise Compatible with Axiom, a series and eS series (Sonar enabled models). £297.83 inc VAT Add to basket
Q-Link Q-Link Brand Faceted Chain Copper 30” for Pendants Compatible with all Q-Link Pendants, except Titanium. Approximate Diameter: 2.2-2.4mm. Manufacturer Warranty: 30 Days. £28.94 inc VAT Add to basket
NASA NASA Easy Navtex comes with H Vector Antenna Nasa Easy Navtex with H Vector Navtex Antenna. With big, bold characters for easy viewing and intuitive message formatting, this Navtex unit is very simple & easy to use. £377.41 inc VAT Add to basket
Raymarine Raymarine Bronze B117 Low Profile Thru Hull transducer Compatible hull material: wood and fiberglass. Depth only. Max Power: 600 watts. Frequency: 200/50 KHZ . Cable: 9.1m/30ft. Hole diameter for installation: 2". £359.83 inc VAT View product
