NETWORKING &amp; DATA AVAILABLE.

Raymarine SeaTalk NG (STNG) Backbone Terminator

SeaTalk ng Terminator - Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone.

£31.51 inc VAT

Add to basket

Actisense DIN Rail Mounting Kit

For use with the EMU-1, NDC-5 & NBF-3. Suitable for use with a top hat rail, type EN50 022 or a G section rail, type EN 50 035. The EMU-1 can be mounted horizontally (recommended) or vertically.

£31.67 inc VAT

Add to basket

Actisense Female NMEA 2000 Terminator

Actisense terminators are exceptionally robust to withstand the harsh conditions of the marine environment and have been designed for quick and easy installation.

£32.21 inc VAT

Add to basket

Actisense Male NMEA 2000 Terminator

Actisense terminators are exceptionally robust to withstand the harsh conditions of the marine environment and have been designed for quick and easy installation.

£32.21 inc VAT

Add to basket

Maretron Micro Termination Resistor Female

Screw connector for positive connection . Termination resistors are used to terminate both ends of the trunk line.

£32.50 inc VAT

Add to basket

Maretron Micro Termination Resistor Male

Screw connector for positive connection . Termination resistors are used to terminate both ends of the trunk line.

£32.50 inc VAT

Add to basket

Maretron Mini Cap to cover Female Connector

£32.50 inc VAT

View product

Maretron MPower Bypass Module Jumper Wire

Red Bypass Jumper Wire with Lugs, 6AWG. For use with the Maretron MPower CBMD12 Bypass Module.

£32.50 inc VAT

Add to basket

Actisense NMEA 2000 Bulkhead / Panel Mounted Connector – Female

Panel mount wired connectors to allow NMEA 2000 installations through watertight bulkheads or panels to be achieved.

£33.26 inc VAT

Add to basket

Actisense NMEA 2000 Bulkhead / Panel Mounted Connector – Male

Panel mount wired connectors to allow NMEA 2000 installations through watertight bulkheads or panels to be achieved.

£33.36 inc VAT

Add to basket

Actisense NMEA 2000 Protective Screw Cover – Female 10 Pack

Protective screw on cover for NMEA 2000 Female end connectors. Pack of 10

£33.77 inc VAT

Add to basket

Actisense NMEA 2000 Protective Screw Cover – Male 10 Pack

Protective screw on cover for NMEA 2000 Male end connectors. Pack of 10

£33.77 inc VAT

Add to basket

Garmin NMEA 2000 Backbone / Drop Cable – 1ft (0.3m)

Extend your NMEA 2000 backbone with the 1 ft. (0.3 m) backbone/drop cable.

£33.98 inc VAT

Add to basket

Garmin NMEA 2000 T-Connector

Add components to your NMEA 2000 network by installing the T-connector on your backbone cable.

£33.98 inc VAT

Add to basket

Garmin NMEA 2000 Power Cable

Supply power to your NMEA 2000 network with our 6 ft. (2 m) power cable.

£33.98 inc VAT

Add to basket

Garmin NMEA 2000 Inline Terminator

Use the inline terminator between the backbone cable and your compatible device to correctly terminate the network.

£33.98 inc VAT

View product

Garmin NMEA 2000 Power Isolator

The NMEA 2000 power isolator is useful to ensure proper installation of the NMEA 2000 network in separating different power sources that could power the bus. Some NMEA 2000 capable engines can potentially provide power to the NMEA 2000 bus. The NMEA 2000 power isolator is useful because it makes sure the NMEA 2000 power from the engines and system power are kept separate.

£33.98 inc VAT

Add to basket

Garmin NMEA2000 Backbone / Drop Cable – 0.3m

Extend any NMEA 2000 network with these Garmin backbone / drop cables.

£33.98 inc VAT

Add to basket

Garmin NMEA2000 Power Isolator

Use this power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.

£33.98 inc VAT

View product

Garmin NMEA2000 1 Port T-Connector

Add components to any NMEA 2000 network by installing this T-connector on the backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version.

£33.98 inc VAT

Add to basket

Raymarine RayNet to RJ45 Adaptor – 100mm

Raymarine Raynet (Male) to RJ45 Adaptor cable

£34.01 inc VAT

Add to basket

Raymarine Extender

SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.

£36.67 inc VAT

Add to basket