Description
- Speed and temperature
- Speed Range: 2 knots to 45 knots (2 MPH to 52 MPH)
- NMEA 2000
- Retractable insert in a plastic housing with a water valve
- Plastic P17 housing
- Retrofits into B617V P617V SS617V P217 P314 and ST650 housings
- NMEA 2000certified cable assembly
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Airmar
Airmar DST800 P17 Smart Sensor 235kHZ NMEA 0183
Airmar 44-072-2-41 DST800 P17 Smart Sensor NMEA 0183 With Bare Cable Ends The DST800 is a Smart, TRIDUCER® Multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. The DST800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000® display or network. Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled.
Airmar
Airmar ST850 Transducer Plastic Housing with 10m Cable
Airmar 31-590-1-41 ST850 P17 Speed & Temperature Sensor - No Connector The ST850 is a low-profile, retractable, thru-hull sensor that computes accurate speed and temperature data and sends it to any NMEA 0183 or NMEA2000® display or network. These low-profile units are nearly flush and minimize drag with only 5 mm (3/16") extending outside of the hull. The housing features a water valve which minimizes water ingress into the boat when the retractable insert is temporarily out for cleaning.
Airmar
Airmar ST850-HS Transducer With 15m Cable Navico
Airmar 31-590-23-01 ST850-HS Speed & Temperature Sensor with Navico Connector These low-profile units are nearly flush and minimize drag with only 5 mm (3/16") extending outside of the hull. The housing features a water valve which minimizes water ingress into the boat when the retractable insert is temporarily out for cleaning.
