Description
- Frequency: CHIRP Mid-band (85-165 kHz)
- Power: 600 W
- Beamwidth: 24°-13°
- Maximum Depth: 1 900 ft. freshwater
- Depth/Speed/Temperature: Depth and Temperature
- Number of Pins: 8-pin
- Cable Length: 20 ft.
- Supported Deadrise/Transom Angles: 0°- 70° degree transom
GT15M-TM transducer is perfect for fishermen who want clear bottom definition under the boat as well as crisp clear and wide fish arches with excellent target separation to depth up to 1 900 feet.
The 8-pin transducer features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be mounted on the transom.
Follow the included installation instructions carefully to avoid damaging your boat.
Compatible & Related Products
Useful compatible products and accessories recommended for this item.
Garmin
Garmin GT15M-IH 8 Pin In Hull Transducer
GT15M-IH transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for boats traveling at high speeds that want to maintain accurate depth readings. The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds. For installation, follow the included instructions carefully to avoid damaging your boat. .
Garmin
Garmin GT22HW-TM 8 Pin Transom Mount Transducer
GT22HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom or trolling motor mounted transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat. The 8-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP ClearVü (455/800 kHz) element has a power rating of 350 W. GT22HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Garmin
Garmin Airmar B744V 8 Pin Bronze Thru-Hull Transducer
Garmin 010-10183-22 Airmar B744V Bronze Thru Hull Tranducer The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
Garmin
Garmin
Garmin Airmar B175H 20° Tilt 8 Pin Bronze Thru-Hull Transducer
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Airmar
Airmar Cable 10M DT 5 Pin Female 6 Pin Female Garmin Mix/Match
Airmar 33-996-01 Mix & Match Lead for Garmin 6 pin Airmar 6 Pin to Garmin 6 Pin Cable for 600W Transducers Although all Mix and Match transducers are sold with the appropriate cable needed for installation, replacements are available separately to allow transducer conversions or for replacing lost or damaged cables. 9 m (29.5’) cable length
