Description
- Nominal voltage: 12V / 24V
- Operating voltage: 8 – 32 V
- Protection class: IPX9k-f
- Dimensions: 150 x 105 mm
- Front ring: Brushed stainless steel
- Front lens: Mineral glass
- Display: Color IBN + 1.44″ TFT optically bonded
- Analog inputs: 8x resistive / 2x frequency / 4x voltage / 2x 4-20mA
- Digital inputs: 2x SAE J1939 NMEA 2000
- DeviceNet M12 5 pins Micro-pack MW1000 (with fitting cable)
The EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA2000 and a J1939 CAN port. The EngineBox can also be used on older completely analogue engines thanks to the analogue input ports provided and designed for: RPM data 0-400 Ohm sensors and 4-20mA sensors.
EngineBox is available in 2 versions: Single Engine and Dual Engine. The Dual Engine version is designed with double frequency and resistive inputs. This allows customers simplified installation wiring reduced commissioning time and the required installation space.
The EngineBox has to be set up using an intuitive PC Configuration Tool making it easy for programming the inputs (delivered free of charge).
The EngineBox is designed to be installed also in hazardous areas (for additional information please check the technical characteristics described in the installation manual).
Upgrade Options
Alternative or higher-specification products you may also wish to consider.
Veratron
Veratron Viewline Flex 52 NMEA 2000 Marine Instrument Gauge – Black
The VL Flex device can easily replicate every analog instrument thanks to the sun-readable 1.44” TFT display embedded into a standard 52 mm satellite instrument. The supported analog inputs allow you to directly read from your engine sensors, and the CAN interface expands this possibility by allowing the device to read from the digital network.
Veratron
Veratron LinkUP Intelligent Battery Sensor 12V Kit with B00043901
Veratron's Intelligent Battery Sensor (IBS), it’s simple to monitor their status and health in real-time. The system works with any OceanLink, AcquaLink or NMEA 2000-networked display, and is compatible with the latest glass cockpit systems. The system includes a Veratron LinkUp Gateway Module that enables the Intelligent Battery Sensor to be connected to the NMEA 2000 network.
Veratron
Veratron Link Up Gateway – Analogue Resistive
The resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000. Easily installed, the LinkUp Gateway replaces the original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone while still being complaint with the NMEA 2000 certification requirements.
Veratron
Veratron VMH 35 Multi-Function NMEA 2000 Display
The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim and tachometer to other devices like chartplotters. This saves the need for an additional external converter. Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines.
