Home > Fishfinders & Sonar
Yamaha · Whaly · Terhi · YAM · Milha

FISHFINDERS & SONAR AVAILABLE.

Marine equipment, parts and chandlery in stock, with support from the Flood Marine team in Omagh.

Raymarine i40 Depth Pack with P7 Depth Thru Hull Transducer Raymarine

Raymarine i40 Depth Pack with P7 Depth Thru Hull Transducer

Crystal clear depth readout. Shallow and deep anchor alarms. Minimum depth display. Red backlighting for improved visibility. Large controls for ease of use at sea. Low power consumption for increased battery life. SeaTalk interface (SeaTalkNG when used with SeaTalk converter). Built-in transducer interface. Same footprint as the older Raymarine ST40 instrumentation. Includes P7 Depth Thru-Hull Transducer.
£349.51 inc VAT
Add to basket
Airmar B117 Bronze Depth Thru Hull transducer Airmar

Airmar B117 Bronze Depth Thru Hull transducer

Airmar 31-092-6-02 - B117 Depth Tranducer Bronze Through Hul This bronze thru-hull mount transducer performs well at high speeds. An excellent choice for fibreglass and wood hulls, this 8-pin 600 W narrow stem transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7-degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Do not use on metal hulls. When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
£352.54 inc VAT
View product
Raymarine iTC-5 Instrument Transducer Converter Raymarine

Raymarine iTC-5 Instrument Transducer Converter

Easily convert Transducer signals to SeaTalkNG The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended STng systems can support multiple iTC-5 units. SeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backbone. Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass). If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers.
£359.83 inc VAT
Add to basket
Raymarine i40 Depth Pack with P66 Depth Transom Mount Transducer Raymarine

Raymarine i40 Depth Pack with P66 Depth Transom Mount Transducer

Crystal clear depth readout. Shallow and deep anchor alarms. Minimum depth display. Red backlighting for improved visibility. Large controls for ease of use at sea. Low power consumption for increased battery life. SeaTalk interface (SeaTalkNG when used with SeaTalk converter). Built-in transducer interface. Same footprint as the older Raymarine ST40 instrumentation. Includes P66 Depth Transom Mount Transducer.
£380.50 inc VAT
View product
Garmin Airmar DT800 20° Tilt NMEA 2000 Thru-Hull Transducer Garmin

Garmin Airmar DT800 20° Tilt NMEA 2000 Thru-Hull Transducer

Garmin 010-11105-00 Airmar DT800 Smart Sensor 20 Degree 20° Tilted version for 16° - 24° hull deadrise The DT800 utilizes Airmar’s proven Tilted Element and broadband technologies in this thru-hull depth and temperature Smart Sensor. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000 display or network. Airmar's Smart Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display.
£383.99 inc VAT
Add to basket
Garmin GT54UHD-TM 12 Pin Transom Mount Transducer Garmin

Garmin GT54UHD-TM 12 Pin Transom Mount Transducer

The GT54 ultra high-definition all-in-one transducer provides image details so clear and precise, you can actually see fish hanging just off branches of submerged trees, brush and rocks. You can see size differences between bigger and smaller fish and even see individual fish swimming in bait balls. You get the highest resolution ClearVü and SideVü scanning sonar images available plus amazingly clear high wide CHIRP traditional sonar1 — all in one transducer.
£383.99 inc VAT
Add to basket