Marine equipment, parts and chandlery in stock, with support from the Flood Marine team in Omagh.
Scanstrut
Scanstrut's Deck Pod allows the installation of a MFD on virtually any flat surface on board. This allows the display to be in the prime position while out sailing on any boat. With the pull of a lever, the intuitive design gives a 360-degree viewing angle to make the most from what the display has to offer.
Scanstrut
With great new design features, Scanstrut's Helm ScanPod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments right where they are needed. Fits pedestal rails from 25mm to 33.7mm (0.98″ – 1.33″) diameter.
Scanstrut
With great new design features, Scanstrut's Helm ScanPod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments right where they are needed. Fits pedestal rails from 25mm to 33.7mm (0.98″ – 1.33″) diameter.
Scanstrut
Scanstrut
Airmar
Airmar 44-164-1-01 ST850 P17 Smar Sensor NMEA 2000 The ST850 is a low-profile, retractable, thru-hull sensor that computes accurate speed and temperature data and sends it to any NMEA2000® display or network. These low-profile units are nearly flush and minimize drag with only 5 mm (3/16") extending outside of the hull. The housing features a water valve which minimizes water ingress into the boat when the retractable insert is temporarily out for cleaning.
Scanstrut
Furuno
Actisense
Navico
Garmin
Garmin 010-10183-22 Airmar B744V Bronze Thru Hull Tranducer The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
Garmin
Weight: 2.47 lbs. (1.12 kg). Cable length: 30’. Number of pins on connector: 12. Dimensions: Transducer: 9.0 x 2.5 x 1.2 in (228 x 62 x 30 mm). Frequency: Traditional: CHIRP 80-160 kHz, DownVü: CHIRP 245-275 kHz and CHIRP 445-465 kHz, SideVü: CHIRP 245-275 kHz and CHIRP 445-465 kHz. Max Depth: Traditional: 1,800 ft, DownVü: 1,000 ft, SideVü: 750 ft.
Veratron
This 4.3” optically bonded IPS TFT display ensures perfect readability, even under direct sunlight. With support for NMEA 2000, J1939 CAN, plus analog inputs and HTML5-ready Ethernet, the OL 43 is an all-in-one solution for modern marine instrumentation.
Raymarine
The i60 instruments are designed to complement the all new Raymarine multifunctional displays. Designed specifically for sail boaters, these stylish, dedicated-function instruments cover wind and close-hauled wind options in analogue and digital formats. Excellent viewing angles for both day and night conditions and simple, push-button controls make i60 instruments extremely easy to see and use. They are also simple to install thanks to the front-mount design.
Airmar
The G2183 is a highly accurate GPS antenna that is WAAS/EGNOS enabled. It is one of the first true 10 Hz GPS antennas made available. Scoring high in sensitivity, it delivers quick signal acquisition, reliable positioning, and accurate speed and course-over-ground readings.
Scanstrut
Garmin
The gWind transducer features twin-fin technology with 3-bladed propeller for more accurate TWS in lighter air while the twin-fin design gives a more stable TWA. The 3-bladed propeller, unlike a cups design, is always efficient. Combined with optic reading this transducer provides superior accuracy at low wind speeds and also provides for excellent linearity. The included GND 10 black box bridge enables the Nexus Network and compatible Garmin chartplotters to share critical NMEA 2000 data. The GND 10 enables Garmin chartplotter owners to use Nexus sail equipment and vice versa. In The Box gWind transducer, GND 10, NMEA 2000 drop cable (2 m), NMEA 2000 T-connector, Mast cable with female connector (25 m), Nexus network cable (5 m; straight connector), Nexus female field installable connector, Mast bracket, Mounting hardware, Documentation.
Scanstrut
Airmar
Airmar 44-168-1-01 ST800 P120 Speed & Tempreture Smart Sensor NMEA 2000 The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA2000® formats. These low-profile units are nearly flush and minimize drag with only 5 mm (3/16") extending outside of the hull.
Airmar
Airmar 31-704-1-01 SS60 50/200 DST 20' Tilt Thru Hull Transducer with 5 Pin Female Connector 20' Tilted version for 16' to 24' hull deadrise The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular tilted element feature. Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.
Airmar
The SS60 is the stainless-steel version of our popular, B60, Tilted Element™ transducer. This product provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam returns crisp echoes for more-accurate depth readings.
Airmar
The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular, Tilted Element feature. The transducer is installed almost flush to the hull and the tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer and more accurate depth readings. 12° tilted version for 8° to 15° hull deadrise
Scanstrut
Garmin
This entry level CHIRP solution provides good depth capability and target separation. This 8-pin 300 W bronze thru-hull mount transducer has a depth of 1,500 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 8 to 15 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
